Sharp XG-V10XU Lamp Maintenance, Confirming the Lamp Usage Time, Projector, Remote Control

Lamp Maintenance

Confirming the Lamp Usage Time

Lamp

The lamp in this projector operates for approximately 1,000 cumulative hours, depending on the usage environ- ment. (As the usage environment can vary significantly, the projector lamp may not operate for 1,000 hours.) It is recommended that the lamp be replaced after approximately 900 cumulative hours of use or when you notice a significant deterioration of the picture and color quality. The lamp usage time can be checked with the On-screen Display.

CAUTION

•Intense light hazard. Do not attempt to look into the aperture and lens while the projector is operating.

Projector Remote Control

1, 4

2, 3

1.2.3 4.5.6

(GUI) On-screen Display

This function allows you to check the accumulated lamp usage time.

(Slide the MOUSE/ADJUSTMENT switch	MOUSE ADJ.
on the remote control to the ADJ. position.)

1Press MENU.

2Press ß/© to select “Options (2)”.

3Press ∂/ƒ to select “Lamp Timer”. The lamp usage time will be displayed.

4To exit from the GUI, press MENU.

•It is recommended that the lamp be replaced after approximately 900 cumulative hours of use. See pages 71 and 72 for lamp replacement.

	Condition		Problem	Possible Solution
The LAMP REPLACEMENT			• Lamp has been used for over 900	• Purchase a replacement lamp unit
indicator lights up red, and “LAMP”			hours.	(lamp/cage module) of the current
and “	” will flash in yellow in the			type BQC-XGV10WU/1 from your
lower-left corner of the picture.				nearest Authorized Sharp Industrial
				LCD Products Dealer or Service
A significant deterioration of the
				Center.
picture and color quality occurs.
				• Replace the lamp. (See pages 71
The power will automatically turn			• Lamp has been used for over 1,000
				and 72.) If you wish, you may have
off and the projector will enter			hours.
				the lamp replaced at your nearest
standby mode.
				Authorized Sharp Industrial LCD
“LAMP” and “		” will flash in red in
				Products Dealer or Service Center.
the lower-left corner of the picture,
and the power will turn off.

E-70

Troubleshooting Maintenance&