Adjusting the Computer Images (RGB menu only)
Projector | Remote Control |
1, 6 2, 3, 4
5
Saving and Selecting Adjustment Settings
This projector allows you to store up to seven adjustment settings for use with various computers. Once these settings are stored, they can be easily selected each time you connect a computer to the projector.
Saving the adjustment setting
(Slide the MOUSE/ADJUSTMENT switch MOUSE ADJ. on the remote control to the ADJ. position.)
OperationBasic
1.2.3 4.5.6
(GUI)
2
3
3
1Press MENU.
2Press ß/© to select “Fine Sync”.
3Press ∂/ƒ to select “Save Setting”, and then press ©.
4Press ∂/ƒ to select the desired memory location of the setting.
5Press ENTER to save the setting.
6To exit from the GUI, press MENU.
Selecting a saved setting
(Slide the MOUSE/ADJUSTMENT switch MOUSE ADJ. on the remote control to the ADJ. position.)
1Press MENU.
2Press ß/© to select “Fine Sync”.
3Press ∂/ƒ to select “Select Setting”, and then press ©.
4Press ∂/ƒ to select the desired memory setting.
5Press ENTER to select the setting.
6To exit from the GUI, press MENU.
•If a memory position has not been set, a resolution and frequency setting will not be displayed.
•When selecting the stored adjustment setting with “Select Setting”, the computer system should match the stored setting.