Turning On/Off the On-screen Display
Projector | Remote Control | This function allows you to turn on or off the |
|
| messages that appear during input select. |
|
|
OperationBasic
1, 6 2, 3, 4
5
1.2.3 4.5.6
(GUI)
Description of OSD Display
Selected item | Description |
| |||
|
|
| |||
Normal | All |
| |||
Level A | INPUT, CUSTOM, FREEZE, ENLARGE, AUTO SYNC, |
| |||
| VOLUME, MUTE, BLACK SCREEN are not displayed. |
| |||
Level B | All |
| |||
| TOOLS, LENS and warning display (Power off, Temp., |
| |||
| Lamp etc.)). |
| |||
|
|
|
|
|
|
(Slide the MOUSE/ADJUSTMENT switch |
|
|
|
| |
|
| ||||
MOUSE |
|
| ADJ. | ||
on the remote control to the ADJ. position.) |
|
|
|
|
1Press MENU.
2Press ß/© to select “Options (1)”.
3Press ∂/ƒ to select “OSD Display”, and then press ©.
4Press ∂/ƒ to select the desired
5Press ENTER to save the setting.
6To exit from the GUI, press MENU.
Setting the Video Signal (VIDEO menu only)
Projector | Remote Control |
1, 6 2, 3, 4
5
1.2.3 4.5.6
(GUI)
The video input system mode is preset to “Auto”; however, it can be changed to a specific system mode if the selected system mode is not compatible with the connected audiovisual equipment.
(Slide the MOUSE/ADJUSTMENT switch | MOUSE ADJ. |
on the remote control to the ADJ. position.) |
|
1Press MENU.
2Press ß/© to select “Options (1)”.
3Press ∂/ƒ to select “Video System”, and then press ©.
4Press ∂/ƒ to select the desired video system mode.
5Press ENTER to save the setting.
6To exit from the GUI, press MENU.
•When the system mode is set to “Auto”, you may not receive a clear picture due to signal differences. Should this occur, switch to the video system of the source signal.
•AUTO cannot be set for