JVC VR-510U manual Alarm or day/time direct search, Alarm direct search, Day/time direct search

7 PLAYBACK AND SPECIAL-EFFECTS PLAYBACK (contd.)

7-4 Alarm or day/time direct search

You can access a recording by specifying the alarm number or date/time.

2.	[ S EARC H	MENU ] JOG	The cursor blinks.
	A L AR M	S EA R CH

T I ME D A T E S EA R CH

3.	[ AL A R M S E A RC H ]					JOG
	M	D		Y H	M
	1 2	2 5	2 0 0 1 1 2 : 1 2
	[ AL A R M L I S T ] E X E C U T E : P R ES S B UT T O N
	N o	M	D	Y	H	M
	0 0 0 0 9 9	1 2	2 5	2 0 0 1	1 2 : 0 0
	0 0 0 0 9 8	1 0	1	2 0 0 1	1 3 : 0 0
	0 0 0 0 9 7	8	1	2 0 0 1	1 0 : 1 1
	0 0 0 0 9 6	7	4	2 0 0 1	9 : 0 0
	0 0 0 0 9 5	5	6	2 0 0 1	1 2 : 1 0
	0 0 0 0 9 4	5	4	2 0 0 1	1 4 : 0 0
	0 0 0 0 9 3	5	1	2 0 0 1	1 0 : 1 1
	0 0 0 0 9 2	4	5	2 0 0 1	9 : 0 0
	0 0 0 0 9 1	3	1 0	2 0 0 1	8 : 0 0
	0 0 0 0 9 0	2	6	2 0 0 1	5 : 0 0

Caution:

●Be sure to clear the alarm list in the Stop mode. If you try to

clear the list in any other mode, "ALARM LIST CLEAR**%" is not shown and you will be unable to check progress of the deletion procedure.

●While the alarm list is being cleared, all buttons are disabled. Clearing the alarm list can take up to 30 minutes or more. For example, if the alarm list includes 10,000 events, it takes about 5 minutes to clear the list.

Memo:

●In the Alarm/Sensor mode, jog/shuttle dial response may be slow.

2.	[ S EARC H MENU ] JOG
	A L AR M	S EA R CH	The cursor blinks.
	T I ME	D A T E S EA R CH

3.	[ T I M E	D A T E	S E A RC H ] JOG
	M D	Y	H M
	1 2 2 5	2 0 0 1 1 2 : 1 2

E X E C U T E : P R ES S B UT T O N

Alarm direct search

1.Turn the power ON.

Check the connections and set the [POWER] switch on the rear panel to ON.

2.Display the [SEARCH MENU] button.

Press the [SEARCH] button to display the [SEARCH MENU] screen on the monitor.

Switch the jog dial function with the shuttle dial as described in “Jog/shuttle dial operation” on page 16.

3.Display the [ALARM SEARCH] screen.

Set the cursor to [ALARM SEARCH] with [JOG f ]. Turn the shuttle dial to display the [ALARM SEARCH] screen.

4.Search by “month”, “day”, “year”, “hour” and “minute”.

Operate the shuttle dial so that the month area for the search date blinks. Set “month”, “day”, “year”, “hour” and “minute” with [JOG p[] and [JOG – +].

5.To search by Alarm No.

Select the alarm No. to be searched with [JOG f ].

6.Start the search.

Press the [SKIP SEARCH·EXECUTE] button to start the search.

When the search ends, the Still mode is engaged. To check the alarm recording section, press the [PLAY] button.

Clearing the alarm list

In the Stop mode, open the <ALARM SEARCH> screen and press the [CLEAR] button to clear the alarm list. "ALARM LIST CLEAR**%" is shown on the monitor.

*If recording is executed or <REC MODE> in <ALARM/ SENSOR MODE> is set to “SENSOR”, the list cannot be cleared. To clear the list, first set <REC MODE> to “ALARM”, then call the [ALARM SENSOR] screen and press the [CLEAR] button.

Day/time direct search

1.Turn the power ON.

Check the connections and set the [POWER] switch on the rear panel to ON.

2.Display the [SEARCH MENU] button.

Press the [SEARCH] button to display the [SEARCH MENU] screen on the monitor.

Switch the jog dial function with the shuttle dial as described in “Jog/shuttle dial operation” on page 16.

3.Display the [TIME/DATE SEARCH] screen.

Set the cursor to [TIME/DATE SEARCH] with [JOG f]. Turn the shuttle dial to display the [TIME/DATE SEARCH] screen.

4.Search by “month”, “day”, “year”, “hour” and “minute”.

Set “M”, “D”, “Y”, “H” and “M” with [JOG p[] and [JOG – +].

5.Start the search.

Press the [SKIP SEARCH·EXECUTE] button to start the search.

When the search ends, the Still mode is engaged. To check the alarm recording section, press the [PLAY] button.

*If no recording matching the specified date can be found, the head jumps to the position closest to the specified date and time.

35