28
6-4 Alarm recording
6 RECORDING (contd.)
When an alarm signal is received (via the rear panel [ALARM IN] terminal) during recording, the alarm recording mode set with
the menu switch is automatically engaged.
1. Connect an alarm sensor.
Connect the alarm sensor to the rear panel [ALARM IN]
terminal.
2. Turn the power ON.
Check the connections and set the [POWER] switch on
the rear panel to ON.
3. Set the menu switches.
Set the required menu switches. For details, refer to
“Setting” on page 18.
[ALARM/SENSOR MODE]
[REC MODE] : Set to “ALARM”.
[REC DURATION] : Select how long you want alarm
recording to continue after an alarm signal is input.
[BUZZER]
[ALARM/SENSOR]: Set to “ON” to sound the buzzer
during alarm recording.
Reference: “5-3 Menu switch details” on page 21.
4. Start recording.
Refer to “Basic operation” on page 22.
When an alarm signal is received, alarm recording starts
(see step 3 above).
* To stop the buzzer during alarm recording, press the
[CANCEL] button.
Memo:
●Recording continues for about 5 seconds after the set
duration has passed.
●Alarm recording speed <REC SPEED> is fixed at “30”.
<AUDIO REC> is fixed to “ON”.
●<REC QUALITY> setting for alarm recording is the same as the
normal recording setting (used before an alarm is detected).
Repeat recording during alarm recording
Repeat recording is canceled if even one alarm
recording is performed when menu switch
<REPEAT REC> is set to “AL·STOP”.
When menu switch <REPEAT REC> is set to
“AL·LOCK”, alarm recorded sections are protected
when repeat recording is executed.
When menu switch <REPEAT REC> is set to
“ALL”, all alarm recordings are overwritten except
Alarm 1.
To erase Alarm 1, erase all alarms with the
[CLEAR] button.
If the <REC DURATION> switch in <ALARM/
SENSOR MODE> is set to “MANUAL” and alarm
recording continues, recording will stop when the
disk is full even if menu switch <REPEAT REC> is
set to “ALL”.
POWER
WARNING
SLEEP REC STOP PLAY STILL
TIMER CANCEL
DISPLAY
MENU
SEARCH
S
E
L
E
C
T
REV FWD
EXECUTE
SKIP/ALARM
SEARCH
REC
CLOCK RESET/ CLEAR
OPE. LOCK
ON
DIGITALVIDEORECORDER VR-510U
[MENU] button
Jog dial
Shuttle search dial
[CANCEL] button
[REC] button
When set to “ALL”
Beginning of the hard disk
Overwriting
Alarm 1
Alarm 2
Alarm 3
Alarm 4
Alarm 5
Repeat recording
End of the hard disk
[EXT MODE]
REC DUR
ATION 10SEC
1.REC MODE OFF
1.REC MODE ARM
2.REC DURATONI
2.HDD FULL OUT OFF
[ALARM SENSORMODE]
180
AL
SEC
3.PRESENSO
R
4.PRESENSO
R
RECOFF
OGJ
[ALARM/SENSOR] screen
Set to “ALARM”.
3.
When set to “AL•LOCK”
Beginning of the hard disk
Alarm 1
Normal
recording 1
Alarm 2
Alarm 3
Normal
recording 2
Normal
recording 3
Normal
recording 1
Normal
recording 2
Normal
recording 3
End of the hard disk
Protected
Over-
writing
PROGRAM TIMER REC ALARM REC
<REC QUALITY>BASIC Recording with <REC
QUALITY> set to "BASIC"
Alarm detection
Before alarm detection
Repeat
recording