7 PLAYBACK AND SPECIAL-EFFECTS PLAYBACK
7-1 Basic operation
POWER
WARNING
SLEEP
Operation
| DIGITAL VIDEO RECORDER |
TIMER CANCEL MENU | L |
SE ECT |
REC
|
|
| REV | FWD |
|
|
| DISPLAY | SEARCH |
| CLOCK RESET/ CLEAR |
|
|
|
|
| |
|
|
|
| EXECUTE | OPE. LOCK |
REC | STOP | PLAY | STILL |
| |
|
| ||||
|
|
|
|
| ON |
|
|
|
| SKIP/ALARM |
|
|
|
|
| SEARCH |
|
[STOP] button [STILL] button [PLAY] button
Memo:
1.Turn the power ON.
Check the connections and set the [POWER] switch on the rear panel to ON.
2.Start playback.
Press the [PLAY] button. The [PLAY] indicator on the display panel lights and playback starts.
3.Stop the playback temporarily.
Press the [STILL] button. The [STILL] indicator on the display panel lights and the Still mode is engaged.
4.
Press the [PLAY] button to start playback again.
5.Stop playback.
Press the [STOP] button to stop playback.
●When the <REC MODE> switch in <ALARM/SENSOR MODE> is set to “SENSOR”
•The playback picture appears to stop for a moment or sound is interrupted.
●If no signal is input from the selected camera during recording, the picture may freeze or a black screen may be displayed.
Playback
●Press the [PLAY] button to start playback from the point where playback was last stopped.
Beginning of the hard disk (full)
Event 1
Event 2
Previous playback
Event 3
Playback starts from the position where the playback was last stopped.
Event 4
End of the hard disk (0%)
Memo:
●The screen may go black or sound may be interrupted during transitions between events.
Simultaneous Playback mode
●Lets you check a recording while recording is taking place.
●Jog/shuttle playback and skip search are available in addition to normal playback.
●When the [PLAY] button is pressed, playback starts from the point where playback was last stopped.
Memo:
●When an alarm signal is received, the playback picture may appear to stop or sound may be interrupted. However, this does not affect the recording.
31
