Network Function
Setting Up the Optional Boards
Three optional Expansion Boards from Sharp are also available for specialized application. Please see your local Sharp Industrial LCD Products Dealer for details on these boards. Be sure to have service personnel install optional boards.
Boards for Network Capability | Expansion Video Board | |
| LAN Board | SDI (Serial Digital Interface) |
INPUT
DISABLE
ENABLE
OUTPUT
DISABLE
ENABLE
| INPUT 6 | SDI |
INPUT | OUTPUT | AUDIO |
|
| INPUT |
Projector | Remote Control |
1, 4
2, 3
1.2.3 4.5.6
(GUI)
e.g. when installing SDI board
The Optional Board function allows you to set and confirm the optional boards.
(Slide the MOUSE/ADJUSTMENT switch | MOUSE ADJ. |
on the remote control to the ADJ. position.) |
|
1 Press MENU. |
|
| |
2 Press ß/© to select “Options (2)”. |
|
| |
3 Press ∂/ƒ to select “Optional Board”. | FunctionNetwork | FeaturesUseful& | |
4 To exit from the GUI, press MENU. | |||
|
| ||
The type of board and the board status are displayed |
|
| |
as shown below. |
|
|
•LAN Board (10BASE-T)
Set the IP Address, Gateway and Subnet mask in accordance with the sub menu.
•SDI Board
The status of the SDI Board is displayed.
•RS-422 Board
The input and output control signals are displayed.
•For details on intended purpose, see the optional boards operation manuals.