Auto-Sync Time Clock
Figure 4-21. Schedule Settings.
8. Click on the button to save the schedule information, or click on the
button to return to the Home page without saving.
At a pre-determined time of the day and day of the week, the Auto-Sync Time
Clock can be set to send a transaction report file to a designated FTP site (path).
These transaction report files are controlled by setting up schedules as previously
described in the Schedules procedure.
NOTE: You must define an FTP server for the Backup and Restore Utility to
properly function.
NOTE: When a Report schedule occurs, a transaction report text file with the date
it was run will be created from the clock database. The contents of a
scheduled Report will depend upon the schedule frequency settings. The
Report text file created will have a name starting with the last 6 digits of
the “MAC address_ATVSrpt_date.txt”. This file never gets appended
because every time a new Report schedule is run, a new file is created with
the date that it was run. If more than one report schedule from the same
clock is run per day, each subsequent file will have the same name, but
with a _01 (for the 2nd one), _02 (for the 3rd one), _03 (for the 4th one) at
the end of the file name, and so on.
Frequency Settings used
to define contents of a
scheduled Report file and
the scheduled Backup
Transaction file.