Black Box ASTCKEY, ASTCRCR, ASTCPOEK, ASTCBK, ASTCRCB, ASTCRCG, ASTC3000POE manual Enter Text

Chapter 4: Operation

which can be printed on each line (total allowable length = 150 dots or approximately 21 characters). Also, a maximum of 10 rows can be added. See Appendix A for a character table which shows character size as a % of dots for regular and bold characters.

NOTE: Lines cannot be edited. If a mistake is made, press the	button and
start over.

9.Enter the desired text in the text field, select Regular or Bold from the dropdown

menu, and click the button. The new message will appear in the “Message:” display field and the row box on the right (see Figure 4-10). If you

need to correct an error, click the button to clear the Message display field.

10.To enter symbols, select the desired symbol from the dropdown menu, select

Regular or Bold from the dropdown menu, and click the button. The new message will appear in the “Message:” display field and the row box on the

right (see Figure 4-10). If you need to correct an error, click the button to clear the Message display field.

NOTE: If you have added a symbol and press the button the Symbol field will NOT be cleared. Just the Message filed will be cleared.

11.Click the button to retain your print style in the clock for line 1. The default for line 1 = FINRA settings (see Figure 2-16).

12.If a print style is desired for line 2, click on the “Line 2” tab and a similar screen will appear to define print for line 2. Follow the same procedure to define Line 2,

and click on the button to retain print style for line 2 in the clock. The default for Line 2 is the clock IP/MAC address.

Enter Text

Select Symbol

Message

Field

Rows – each line = 1 row.

Press Clear All to start over.

Figure 4-10. Print Lines 1 & 2.

724-746-5500 blackbox.com 4-11