Black Box ASTCRCR, ASTCPOEK, ASTCBK, ASTCRCB, ASTCRCG First Time Set up of the Auto-Sync Time Clock

Auto-Sync Time Clock

NOTE: If this is not your first time connecting to this Auto-Sync Time Clock and a “Favorites” bookmark was created in your Web browser, select it from the Favorites/Bookmarks menu, and the Auto-Sync Time Clock Login page will be displayed. In this instance you will NOT have to Bonjour the clock as its location has already been discovered and saved!

3.2. First Time Set up of the Auto-Sync Time Clock

NOTE: The Auto-Sync Time Clock configuration parameters can be customized at any time and do not have to be done in the following order. It is recommended to set up these parameters to obtain the full potential from you clock.

1.Log into the Auto-Sync Time Clock (see Figure 3-4) and Click on the Settings link under Users, and the Users List screen will appear (see Figure 4-2). Create a new user with a unique Username and Password and store this information in

a secure place. Click on the button to save the new username and/or password in the clock’s flash memory.

Look – Skip Step 1 if a new User is not desired.

2.Click on the Information link under Clock, and the Clock Information will appear (see Figure 3-5). It is recommended to change the name to suit your nomenclature (default name = auto-sync_MAC). See Figure 3-4for an example of a default clock name.

NOTE: The acceptable characters for clock name are ‘a-z’ upper & lowercase, ‘0- 9’, (-) dash, (_) underscore, and (*) asterisk. Uppercase letters will automatically be changed to lowercase.

Enter a unique clock description that might, for example, describe where the

clock is located. All other fields on this screen are read only. Click on the button to save your custom clock name and description.

Look – Skip Step 2 if the default clock name and no description are acceptable.

3.Click on the Settings link under Clock, and the Clock Settings screen for general settings will appear (see Figure 4-4). Select the appropriate Time Zone from the dropdown menu, select 12 hour (AM/PM) or 24 hour (Military = default setting) for the display and transaction format. Select if seconds or date will be displayed. Check whether or not daylight savings should be applied. Enter the

Start and End DST dates/times if DST applied. Click on the button to save custom general clock settings.

Look – Skip Step 3 if the default clock settings are acceptable.

4.Click on the General Settings link under Print, and the Print General Settings screen will appear (see Figure 4-6) to setup: minute format, Dual Print (On/Off), Dual Print Timeout (0-60 seconds), Print leading Zero (On/Off), Print

Direction (L/R), and Auto Numbering. Click on the button to save general print options settings.

3-4 724-746-5500 blackbox.com