Cisco Systems MEM-C6K-ATA-1-64M(, MEM-C6K-FLC16M, MEM-C6K-FLC24M, MEM-C6K-FLC64M manual

Corporate Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Catalyst 6500 Series Supervisor Engine Flash PC

Product Numbers:

MEM-C6K-FLC16M(=)

MEM-C6K-FLC24M(=)

MEM-C6K-FLC64M(=)

MEM-C6K-ATA-1-64M(=)

This installation note contains the procedure to install a Flash PC card in the Catalyst 6500 series

supervisor engines.

Note The 64-MB ATA Flash PC card (MEM-C6K-ATA-1-64M) requires Supervisor Engine 2 with ROMMON

software release 7.1(1) or later releases. For ROMMON software upgrade details, refer to

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/relnotes/78_13488.htm.

The ATA Flash PC card is supported on Catalyst 6500 series switches running Cisco IOS Release

12.1(8a)EX or later releases on both the supervisor engine and the Multilayer Switch Feature Card

(MSFC).

The ATA Flash PC card is supported on Catalyst 6500 series switches running Catalyst software

release 7.5(1) or later releases on the supervisor engine and Cisco IOS on the MSFC.

Note The 64-MB linear Flash PC card (MEM-C6K-FLC64M) is supported only on Supervisor Engine 1 and

requires ROMMON software release 5.3(1) or later releases.

The 64-MB linear Flash PC card is supported on Catalyst 6500 series switches running Cisco IOS

Release 12.1(13)E4 or later releases on both the supervisor engine and the MSFC.

The 64-MB linear Flash PC card is supported on Catalyst 6500 series switches running Catalyst software

release 7.5(1) or later releases on the supervisor engine and Cisco IOS software on the MSFC.