Philips DVP3350V/05 Operation with DVD and Video CD, Playing a DVD and Video CD, General Features

VCD2.0 VCD1.1

Operation with DVD and Video CD

Playing a DVD and Video CD

Playback Setup DVD

●Turn on the TV and select the video input source connected to the DVD player.

●Audio system:Turn on the audio system and select the input source connected to the DVD player.

1 Press OPEN/CLOSE to open the disc tray.

2 Load your chosen disc in the tray, with the playback side down.

When a double-sided DVD is inserted, make sure the side you want to play is facing down.

3 Press OPEN/CLOSE to close the tray.

Playback starts automatically. If playback does not start, press PLAY B.

In some cases, the disc menu might appear instead.

If a menu screen is displayed

The menu screen may be displayed first after loading a DVD or Video CD which offer a menu.

DVD

Use the 1 2 3 4 buttons to select the title/chapter you want to view, then press OK to start playback.

Press TITLE or DISC MENU to return to the menu screen.

VCD2.0

●Use the number buttons to select the track you want to view.

Press BACK (O) to return to the menu screen.

●Menu setting and the exact operating procedures for using the menu may differ depending on the disc. Follow the instructions on the each menu screen.

You also may set PBC to Off under setup. See page 19.

Notes

–If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit code must be entered and/or the disc must be authorized (see “LOCK (Parental Control)”, on page 20).

–DVDs may have a region code.

Your player will not play discs that have a region code different from your player.The region code for this player is 2 (two).

–To watch a DVD during timer recording standby mode, press POWER 1 and DVD to switch to DVD mode.

General Features

Note

Unless stated otherwise, all operations described use the remote control. Some features may also be available on the Setup menu.

Moving to another TITLE DVD 1 /3

When a disc has more than one title, you can move to another title as follows:

●Press DISPLAY, then press the appropriate numbered button (0-9) to select a title number.

Moving to another CHAPTER/TRACK

DVD VCD1.1 DivX 1 /12 1 /3

When a title on a disc has more than one chapter or a disc has more than one track, you can move to another chapter/track as follows:

●Press S or T briefly during playback to select the next chapter/track or to return to the beginning of the current chapter/track.

●Press S twice briefly to step back to the previous chapter/track.

●To go directly to any chapter during DVD playback, press DISPLAY.Then, press 3/4 to select chapter/track icon. Then, enter the chapter/track number using the numbered buttons (0-9).

Note

For two-digit numbers, press the numbered buttons (0-9) in rapid succession.

Search DVD VCD2.0 VCD1.1 DivX

1Press Q or R during playback.

Or, press and hold 1 or 2 for about four seconds during playback.

The player will now go into SEARCH mode.

2Press Q or R repeatedly to select the required speed:

Or, press and hold 1 or 2 repeatedly for about four seconds to select the required speed.

QX2, QX4, QX16, QX100 (backward) or RX2, RX4, RX16, RX100 (forward).

With a Video CD, DivX disc, the Search speed changes: QX2, QX4, QX8 (backward) or

RX2, RX4, RX8 (forward).

3To return to playback, press PLAY B.

Still Picture and Frame-by-frame playback DVD VCD2.0 VCD1.1 DivX

1Press PAUSE/STEP (X) during playback. The player will now go into PAUSE mode.

2You can advance the picture frame-by-frame by pressing PAUSE/STEP (X) repeatedly on the remote control.

25