VIDEO Plus+ Programming
VIDEO Plus+ greatly simplifies entering the date, channel, start and end times of a Timer Recording by simply entering a PlusCode. PlusCodes are published in most TV guide magazines; they can vary one to nine numbers in length.
1 Make sure that TV channels have been tuned.
Insert a video cassette with protection tab into your VCR.
2 Press VIDEO PLUS+.
Operation with tape (Continued)
6 Press 3 or 4 to switch PDC on or off. Press 2 to select the recording speed.
Press 3 or 4 to select the desired tape speed (SP, IP, or LP).
IP mode determines how much tape is left and switches speed from SP to LP, if necessary, to complete recording the program.
IP mode cannot be selected when PDC is ON. Check that the timer event details are correct.
If you wish to record from AUDIO IN and VIDEO IN on the front or from either of the EURO SCART sockets on the back of VCR, press INPUT to select for correct display (AV1,AV2 or AV3).
VIDEO PLUS+ CODE NO. |
- - - - - - - - - |
REC | 0~9, |
OK i
3 Press the numbered buttons to enter the PlusCode of the TV programme that you wish to record.
If you make a mistake press 1 then enter the revised number.
| VIDEO PLUS+ CODE NO. |
| 246876543 |
| DELETE : |
REC | 0~9, OK i |
4 Press OK.
If PLEASE CHECK is displayed it means that you have entered the wrong PlusCode, entered the PlusCode incorrectly.
If “-
5 Press 1 or 2 to select the settings that you wish to revise. (PR, DATE,TIME and SP).
Press 3 or 4 to enter the correct information.
7 If you want to make another VIDEO Plus+ recording repeat stages 2 - 6.
Press SETUP twice.
If PLEASE CHECK is displayed, you have entered incorrect information and will need to
will appear in the video recorder’s display while your VCR waits to make the recording.
To watch a DVD during timer recording standby mode, press POWER and DVD to switch to DVD mode.
8 Press POWER 1 to end recording.
Note
Programme Delivery Control (PDC)
The Programme Delivery Control (PDC) ensures that the TV programmes that you have programmed for timer recording will be recorded exactly from their beginning to end, even if the actual broadcasting time differs from the scheduled time due to delayed start, or if the programme is extended beyond its scheduled time.Also, if a programme is interrupted, for example, if a news flash is inserted, the recording will also be interrupted automatically and resumed when the programme continues.
The PDC signal is broadcast by the TV station and this controls the timer in the video recorder.
PDC should be set ON for all timer recordings from TV stations broadcasting these signals. It should be set OFF for all timer recordings from TV stations that are not broadcasting these signals.
23
