Philips DVP3350V/05 user manual Connections Cont’d, Connecting to Optional Equipment

Connecting to Optional

Equipment

Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic II/ Pro Logic

Connect the Left and Right DVD/VCR AUDIO OUT or AUDIO OUT (DVD EXCLUSIVE OUT) jacks on this unit to the audio left and right in jacks on your amplifier, receiver or stereo system, using the audio cables.

Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/ Video receiver equipped with a multi-channel decoder (Dolby Digital™ or MPEG 2)

1 Connect one of this unit’s DIGITAL AUDIO OUT jack (COAXIAL) to the corresponding in jack on your amplifier. Use an optional digital (coaxial) audio cable.

2 You will need to activate this unit’s digital output. (See “Audio” on page 19).

Digital Multi-channel sound

A digital multi-channel connection provides the best sound quality. For this you need a multi-channel Audio/Video receiver that supports one or more of the audio formats supported by your unit (MPEG 2 and Dolby Digital). Check the receiver manual and the logos on the front of the receiver.

Rear of this unit

2 channel analog stereo or Dolby Pro Logic II/Pro Logic connection.

DVD exclusive out

DVD/VCR OUT

Digital multi-channel connection (DVD exclusive out connecttion)

COAXIAL	L	R	OPTICAL
DIGITAL INPUT	AUDIO INPUT		DIGITAL INPUT

Amplifier (Receiver)

Connections (Cont’d)

Notes

–If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.

–To see the audio format of the current DVD in the On-Screen Display, press AUDIO.

11