Black Box ASTCRCG, ASTCRCR, ASTCPOEK, ASTCBK, ASTCRCB, ASTCKEY, ASTC3000POE manual Auto-Sync Time Clock

Auto-Sync Time Clock

2.From the main menu, click on the View menu and select the submenu Settings. The Settings and Auto discovery tabs will appear on top. If necessary, from the Settings screen, click on the Discovery Settings tab to change the discovery settings.

This step is optional and should usually be skipped. Only perform this step if you are having discovery problems and need to change the Domain Name, and timeout value.

Enter a new Domain Name if a different one other than the default of local is desired. You can change the clock discovery timeout if greater than the 1 minute default is desired.

The default factory setting on the Auto-Sync Time Clock is “Local Area Service Discovery’ so that clocks on network1 can only be discovered and managed from a PC connected to network1. See Chapter 7 of this Guide for Wide Area clock discovery information.

After entering Discovery Settings, click on red arrow to include the domain, select domains, and then click Auto discovery tab to search.

Figure 5-5. Utility Settings.

Once these changes have been made, click on the Auto Discovery tab to return

to that screen, and click the Start Discovery button to begin the search again with the new discovery settings to generate a list of located clocks.

3.When the clock(s) appears in the list, follow the tool tip and double-click on the desired Auto-Sync Time Clock to launch your browser and open to the clock’s web login (see Figure 5-6).

5-4 724-746-5500 blackbox.com