Additional information
AV COMPU LINK remote control system
The JVC AV COMPU LINK system allows you to enjoy video or audio with the simplest operation.If your video/audio player (such as a DVD player, CD player and VCR) and television or/and amplifier/receiver support the JVC AV COMPU LINK system and are tied with the JVC AV COMPU LINK cable(s), when you simply starting the player, all the necessary settings of the television and/or amplifier/receiver for enjoying playback are automatically performed.
Connection and setup
Using the AV COMPU LINK cable, connect the AV COMPU LINK terminals of each component to one another.
•The unit's AV COMPU LINK setting is operated in the OTHERS page in the preference display. See page 52 for operation.
•For information on the connection between the TV and the receiver, refer to the receiver's Instructions.
To AV COMPU LINK (II, EX or III)
TV
The unit
To AV COMPU LINK (II, EX or III)
TV
Receiver | To AV COMPU LINK |
The unit
•If you connect the unit to a television and receiver via AV COMPU LINK, set the unit's AV COMPU LINK setting to DVD1.
IMPORTANT!
•When you make video connection between the unit and another device (such as a receiver and TV) via the composite,
Additional | information |
|
|
•If you connect the unit to a television via AV COMPU LINK, set the unit's AV COMPU LINK setting as follows.
•When connecting to
•When connecting to
To AV COMPU LINK (II, EX or III)
TV
The unit | To AV COMPU LINK |
VCR
•If you connect the unit to a television and VCR via AV COMPU LINK, set the VCR's Remote Control Code and the unit's AV COMPU LINK setting as follows.
•When connecting to
The unit's AV COMPU LINK setting: DVD2
VCR's Remote Control Code: B
•When connecting to
The unit's AV COMPU LINK setting: DVD3
VCR's Remote Control Code: A
Notes for connection
•If you connect the unit to a receiver via AV COMPU LINK in a system including a Dolby Digital decoder, some functions may not be performed automatically.
•Connect the AUDIO OUT jacks of the unit to the audio input jacks of a receiver that indicating "DVD". Otherwise, the system will not work correctly.
•There may be no description about connections to the unit in the instruction manual of a television or VCR. However a television or VCR with AV COMPU LINK terminals indicating "II", "EX" or "III" can be connected to the unit.
Operation
You can enjoy pictures and/or sound by just putting a source component (which plays back the pictures and/or sound such as a DVD player or VCR) into play mode. You do not have to operate the TV and receiver including not having to perform power switching.
1 Turn on the main power of the television.
2 Insert a disc (or tape) into the source component.
3 Press 3 of the source component.
The following actions are performed automatically:
•Turning on the power for the television.
•Setting the source of the television to the external input
•Turning on the power for the receiver.
•Setting the source of the receiver to the component which has started playback.
58
