JVC XV-S500BK manual Audio, Digital output signal chart

Changing the initial settings

Changing the initial settings

Menu item		Setting options		Notes/examples
SCREEN SAVER	•	ON
You can select the screen saver		The current picture gets dark.
function ON or OFF.
	•	OFF
See page 15 for details about screen
saver function.		The screen saver function is off.
MP3/JPEG	•	MP3	• When a disc contains either MP3 or
The unit can playback MP3 and		MP3 files can be played back if a disc	JPEG files, the unit can play back the
JPEG files recorded on a CD-R/CD-		contains both of MP3 and JPEG files.	files regardless of the setting.
RW disc, however, if a disc contains
	•	JPEG
both of MP3 and JPEG files, you can
only playback files of either type		JPEG files can be played back if a disc
selected by this menu item.		contains both of MP3 and JPEG files.

AUDIO page

		This page allows you to select desired options concerning with audio sound.
AUDIO
DIGITAL AUDIO OUTPUT		STREAM/PCM
ANALOG DOWN MIX		STEREO
D RANGE COMPRESSION		ON
SELECT	USE 5∞23 TO SELECT, USE ENTER TO CONFIRM
ENTER	TO EXET, PRESS CHOICE.

Menu item			Setting options			Notes/examples
DIGITAL AUDIO OUTPUT		•	PCM ONLY		• When playing a DVD VIDEO or
To connect the unit's digital output to			Should be selected when you			Audio CD disc with DTS, use a DTS
an external device equipped with a			connect the DIGITAL OUT jack of the			decoder to get correct signals from
digital input, this item must be set			unit to the linear PCM digital input			your speakers.
correctly.			of other audio equipment.		• With some DVD VIDEO discs that are
See the table below for details						not fully copy-protected, a 20 or 24
		•	DOLBY DIGITAL/PCM
about the relation between the						bit digital signal may be output.
			Should be selected when you
setting and output signals.					•	A signal with the 88.2 kHz or more
			connect the digital input of a Dolby			sampling frequency cannot be
			Digital decoder or an amplifier with			output from the DIGITAL OUT jack,
			a built-in Dolby Digital decoder.			regardless of the setting (due to the
			When this option is selected,			copy protection issue).
			playing back a disc recorded by the		•	MP3 digital audio data cannot be
			DTS or MPEG Multichannel format			output.
			outputs a linear PCM digital signal.
		•	STREAM/PCM
			Should be selected when you
			connect the digital input of an
			amplifier with a built-in DTS, MPEG
			Multichannel or Dolby Digital
			decoder, or the stand-alone unit of
			such a decoder.
Digital output signal chart
Playback discs				Output
		PCM ONLY		DOLBY DIGITAL/PCM			STREAM/PCM
DVD with 48/44.1 kHz, 16/20/24			48/44.1 kHz,16 bit, stereo linear PCM
bit linear PCM
DVD with 96/88.2 kHz, 16/22/24				No output
bit linear PCM
DVD with DTS			48 kHz, 16 bit, stereo linear PCM				DTS bitstream
DVD with Dolby Digital	48 kHz, 16 bit, stereo linear PCM				Dolby Digital bitstream
DVD with MPEG Multichannel			48 kHz, 16 bit, stereo linear PCM				MPEG bitstream
Audio CD/Video CD/SVCD				44.1 kHz,16 bit, stereo linear PCM
Audio CD with DTS			44.1 kHz, 16 bit, stereo linear PCM				DTS bitstream
CD-R/RW with MP3				No output

50