Husqvarna HUV 4421-G / GXP General Information, Model Identification, Controls And Indicators

Models: HUV 4421-D / DXP HUV 4421-G / GXP

1 64
Download 64 pages 60.61 Kb
Page 12
Image 12
General Information

General Information

GENERAL INFORMATION

This manual includes operating procedures, maintenance, and regular servicing information for all gasoline and diesel HUV 4421-G and HUV 4421-D vehicles. All operating procedures, maintenance, and regular ser- vicing are identical unless otherwise noted.

MODEL IDENTIFICATION

The serial number of each vehicle is printed on a bar code decal mounted on the frame above the brake pedal (Example: RC0601-123456) (Figure 3). There is also a second serial number decal mounted on the rear body frame behind the fuel tank. The fuel tank must be removed to view this decal. See following NOTE.

NOTE: Have the vehicle serial number available when ordering parts or making inquiries.

SERIAL NUMBER

7349 STATESVILLE RD. DH0601-123456CHARLOTTE, NC 28269

Figure 3 Serial Number

CONTROLS AND INDICATORS

See General Warnings on page 8.

ýWARNING

Before allowing anyone to drive the vehicle, make sure the driver is familiar with all controls and operating procedures.

Do not tamper with the high idle speed setting on the diesel vehicle. Doing so will void the warranty, as well as damage the engine and other components, and could result in property damage, personal injury, or death due to unsafe speeds.

Do not shift the Forward/Reverse handle while the vehicle is in motion.

Engine must be at idle before shifting the Forward/Reverse handle. Failure to do so may result in injury to inattentive passengers and (or) damage to the vehicle.

To avoid unintentionally starting or rolling the vehicle, set the park brake, place the Forward/ Reverse handle in the NEUTRAL position, turn the key switch to the OFF position, and remove the key when leaving the vehicle.

Page 10 2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual

Page 12
Image 12
Husqvarna HUV 4421-G / GXP, HUV 4421-D / DXP owner manual General Information, Model Identification, Controls And Indicators