Husqvarna HUV 4421-D / DXP Engine OIL Level Check, Do not remove dipstick while engine is running

Engine Oil

NOTE: The normal oil pressure value stated in the Honda engine manual is 28 psi at idle; however, the remote filter design causes oil pressure to be 18 psi, which is normal for this type of oil circulation design.

Kawasaki engine: The Kawasaki gasoline engine has an oil filter that is mounted on a bracket between and in front of the engine and transmission. Inlet and outlet oil-carrying hoses enable oil circulation to and from the engine. See following NOTE.

NOTE: The normal oil pressure value stated in the Kawasaki engine manual is 35-45 psi at idle; however, the remote filter design causes oil pressure to be 18 psi, which is normal for this type of oil circula- tion design.

ENGINE OIL LEVEL CHECK

1.Remove the oil level dipstick from the oil filler tube and wipe oil from the dipstick. See Figure 18, Figure 19, Figure 20, and Figure 21, on page 36. See following CAUTION.

ýCAUT ION

• Do not remove dipstick while engine is running.

2.Check oil level by fully inserting the dipstick into the tube and immediately removing it.

3.If the oil level is at or below the low level mark on the dipstick gauge, add oil to the engine until the level is between low and full levels (safe level). See following CAUTION.

CAUT ION

•Do not fill oil above the full level mark. Doing so will result in decreased engine performance or damage to the engine.

2	3
1
	Full
	Level
	Safe
	Level
	Low
	Level

Figure 18 Engine Oil Level Check –

Honda Gasoline Vehicles

2	3
1
	Full
	Level
	Safe
	Level
	Low
	Level

Figure 19 Engine Oil Level Check –

Kawasaki Gasoline Vehicles

2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual Page 35