IBM 6 MPLS manual Router Attributes, Traffic Mapping Configuration

Page 6

Specialized Models User Guide

6 MPLS Model User Guide

Figure 6-5 Mapping EXP Bits to Drop Precedence and PHB

Router Attributes

Some of the important MPLS Parameters attributes set on routers are described below.

Traffic Mapping Configuration

This attribute specifies bindings between FECs and LSPs. Each row of the Traffic Mapping Configuration table specifies a distinct traffic engineering (TE) binding. Each TE binding specifies the FEC, traffic trunk, and LSP that is applied to the label of the incoming packet.

Only previously defined values appear in the attribute pull-down lists. If no values appear in the attribute pull-down lists, verify that you have defined the FECs and traffic trunks in the MPLS Configuration object, and that the LSPs appear in the network path browser.

SPM-6-6

Modeler/Release 10.0

Image 6

Contents Feature Description Model FeaturesMpls Model Features End of TableModel Features Document Reference DocumentsMpls Configuration Object Attributes Node ModelsModel Attributes Specifying FEC Attributes Specifying Traffic Trunk Profiles Traffic Mapping Configuration Router AttributesConfiguring TE Bindings Configuring LDP Parameters Simulation AttributesConfiguring an LSP’s Attributes LSP AttributesSetup Parameters-specifies the duration of the LSP 13 Using the LSP Browser LSP BrowserAvailable Statistics 14 Selecting Statistics to CollectConfiguring Mpls in a Network Procedure 6-1 Creating Dynamic LSPs from DemandsCreating LSPs End of Procedure Procedure 6-2 Creating Dynamic LSPs ManuallyProcedure 6-3 Creating Static LSPs Procedure 6-4 Creating FECs Procedure 6-5 Creating a Default Traffic TrunkCreating FECs and Traffic Trunks Procedure 6-6 Creating a TE Binding Creating TE Bindings on LERsProcedure 6-7 Exporting LSP Configuration to an Ascii File Procedure 6-8 Using an LSP Configuration File in a ScenarioApplying QoS to an Mpls Network Model 15 Configuring QoS on an LER Mpls Menu Operations Mpls Menu SummaryMenu Item Description Mpls Process Models Information for Opnet Modeler UsersModel Architecture Process model Description