IBM 4J manual Changing Process Parameters, Following command submits the Process named copy.cdp

Page 19

Example - Submit a Process and Turn On Tracing

The following command submits the Process named copy.cdp:

submit file=copy.cdp tracel=4 pnode;

Because tracel is specified and the pnode parameter is included, an SMGR and COMM full trace is performed on the Process. Trace information is written to the default file SMGR.TRC.

Changing Process Parameters

The change process command modifies specified parameters for a nonexecuting Process.

You specify the Processes to be changed by Process name, Process number, secondary node name, and submitter.

You can change the class, destination node, and priority. You can place a Process on the Hold queue or release a Process from the Hold queue by issuing a change process command with either the release or hold=no parameter.

If you submit a Process with a startt parameter, Sterling Connect:Direct places the Process on the Timer queue. If a Process fails, you can move it to the Hold queue by specifying the change process command with hold=yes. Sterling Connect:Direct then places the Process in the Hold queue in HO status. You can release the Process for execution at a later time.

You can set tracing for an existing Process by setting the tracel parameter to 1, 2, or 4. You can turn off tracing for a Process by setting trace1 to 0.

Specify at least one of the following search criteria parameters:

Parameter

Description

Value

 

 

 

pname

Locate the Process to be

name generic (list)

 

changed by Process name.

name—Specifies the Process name, up to

 

 

 

The Process name is limited

8 alphanumeric characters.

 

to 8 characters on Sterling

generic—Specifies a nonspecific value

 

Connect:Direct for Microsoft

 

Windows and Sterling

for the Process name. This generic value,

 

Connect:Direct for z/OS®.

containing pattern-matching characters,

 

 

evaluates to a list of zero or more pname

 

 

strings.

 

 

list—Specifies a list of Process names.

 

 

Enclose the list in parentheses, and

 

 

separate each value with a comma.

 

 

 

pnumber

Locate the Process to be

number from 1–99,999 (list)

 

changed by Process number.

number—Specifies the Process number.

 

Sterling Connect:Direct

 

assigns the Process number

list—Specifies a list of Process numbers.

 

when the Process is

 

Enclose the list in parentheses, and

 

submitted.

 

separate each value with a comma.

 

 

 

 

 

Chapter 1. Controlling and Monitoring Processes 13

Page 18 Page 20
Image 19
Page 18 Page 20
Contents User Guide Page User Guide Copyright IBM Corporation 1999 Contents Iv Sterling ConnectDirect for Unix User Guide Stopping the CLI Overview of the Command Line InterfaceCLI Commands Starting the CLIOption Description Value Entry Sample CommandCdpnum CLI Job ControlCommand Abbreviation Description CLI History CommandsOverview of Sterling ConnectDirect Commands CommandParameter Abbreviation Abbreviations for Common Sterling ConnectDirect CommandsPname = A?PROD5 Submitting a ProcessParameter Description Values Parameter Description Values Id , pswd Username@hostname or user@localhostName nnnnn Name host name nnn.nnn.nnn.nnn orSnodeid field Id ,pswd ,newpswdSpecify retain=initial Following command submits the Process named copyfil Following command submits the Process named payrollName generic list Following command submits the Process named copy.cdpChanging Process Parameters Parameter Description ValueNode specification, userid generic list Remote node specification generic listDeleting a Process from the TCQ Number list Removing a Process from the Execution Queue Stopping Sterling ConnectDirect Flush process command has the following optional parametersParameter Description Viewing a Process in the TCQPname Locate the Process to view EX HC HE HI HO HR HS PE Monitoring Process Status in the TCQ Following command displays the specified Process numberAll EX HC HE HI HO HR HS PE Output from the command is displayed in the following table Dest=/path/file name Determining the Outcome of a ProcessRecord id list Caev Capr CAEV, CaprParameter Description Value Parameter Description Value Parameter Description Value Date day , hhmmss ampm Srcf=/path/file nameGenerating a Detailed Output Report for a Process Recid LOG Timepname Pnumber Stepname Ccod Fdbk Msgid Running System DiagnosticsGenerating a Summary Report for a Process Select StatisticsCOMM.TRC Smgr Trace smgr pnode tnode=ath3500ry level=2 file=Smgp.trc Scheduling Parameter Queue Comments Command DefinitionOverview of the Transmission Control Queue Scheduling Sterling ConnectDirect ActivityProgression of a Process Through the TCQ Execution Queue Element Comment Wait QueueStatus Comment Hold Queue Timer QueueHeld for Call indicates that the Process was Creating a Translation Table Introduction to Translation TablesExample-Creating a Translation Table Compiling a Translation Table Using the ndmxlt UtilityExample-Modifying a Model Translation Table Using Translation During File Transfer OperationsDiagnostic Number Description Translation Table Error MessagesAccessing Sterling ConnectDirect Messages Message File ContentFollowing are the parameters for the message file record Following is a sample ndmmsg commandMessage File Record Format Displaying Message TextSterling ConnectDirect for Unix User Guide Memory-The amount Using the Standalone Batch Compression UtilityFollowing are the parameters for the cdsacomp utility Level-Compression levelCodepage Source codepage, destinationNnnnn Example-Decompress a Text File Example-Precompress a Text FileExample-Precompress a Text File With Codepage Conversion Example-Precompress a Binary FileExamples-csdacomp Command Help Argument Description Validate Configuration FilesConfiguration Reports Cfgcheck command has the following argumentsType the following command at a Unix prompt Generating a Configuration Report on the Base InstallationSterling ConnectDirect Utilities Following example shows an excerpt from a sample report Sterling ConnectDirect Utilities Sterling ConnectDirect for Unix User Guide Compiler version to use for each platform Program using the C++ API callsIntroduction to Writing Custom Programs Compiling Custom ProgramsYou want to create such as apicheck Platform Compile Command++ Function Description Writing Custom C ProgramsNdmerrenth Ndmerror NdmnoerrorNdmapirecvresp or Receiving Responses Using ndmapirecvresp or ndmapirecvrespcNdmapirecvrespc Parameter Description Value PNOD-PNODE Truncated Following is a sample ndmapirecvresp functionSNOD-SNODE Return Code DescriptionNdmapirecvresp or ndmapirecvrespc to retrieve Selectstatistics or Selectprocess , the CLI Writing Custom C++ ProgramsNdmapisendcmdc function call has the following return codes Following is a sample ndmapisendcmd functionSterling ConnectDirect for Unix User Guide Cdfailure Method Description Parameter Return ValuesCdsuccess = 0, Cdfailure = Following is the ConnectDirectSession class headerWriting Custom Programs Sterling ConnectDirect for Unix User Guide Chown root exitskeleton User Exit ProgramsUser Exit Functions Program DescriptionReturn Code Goodrc ErrorrcExitprogram Waiting for a Message Using recvexitmsg or recvexitmsgcHeader Following are the parameters for sendexitmsg or sendexitmsgcStatistics Exit Message Overview of User Exit MessagesFile Open Exit Messages Fileopenoutputreplymsg Security Exit MessagesValidatemsg Validatereplymsg GeneratemsgCopy Control Block User Exit Stop MessageExit Log Files Copyright IBM Corp IBM Corporation J46A/G4 Bailey Avenue San Jose, CA Trademarks Sterling ConnectDirect for Unix User Guide Index Special characters Generatemsg Generatereplymsg Validatemsg Validatereplymsg Page Sterling ConnectDirect for Unix User Guide Page Product Number 5725-C99
Top Page Image Contents