Fujitsu LPF-QSD1W user manual Póññêèé Português Italiano Français

Page 57

4

Loosen two screws on the lamp unit to pull out it.

The lamp unit is so constructed that the screws cannot be detached from it.

Español Deutsch English

5

6

Reverse the disassembling procedure above to set the lamp unit and lamp unit cover in position.

Check that the lamp unit is installed securely.

After inserting the power plug into the receptacle, press "ENTER" button, and then, press "POWER" button five times.

At this time, all monitor indicator lamps blink for a few seconds.

The lamp timer is initialized to "0".

*When replacing the lamp unit, do not touch the glass inside the projector. Dust and fingerprints sticking to the glass may deteriorate the luminous intensity of the light source lamp and shorten its life.

Loosen two screws.

Replace lamp unit with a new one.

Póññêèé Português Italiano Français

Note

For replacement, be sure to use a lamp unit specified by the manufacturer only. Otherwise, failure of the lamp to light up, and explosion or damage of the lamp will result.

Turn on the light source lamp, and press \to select the lamp timer. Check that "0" is set for the lamp timer. Otherwise, initialize the timer again.

ġ ġ

E-57

Image 57
Contents USER’S Manual ContentsSafety Precautions Important Safety InstructionsImportant Information About the lithium battery Information Checking Accessories Transportation Additional PrecautionsLight Source Lamp GroundingMonitor indication Abnormal condition Measures to take Monitor Indication on ProjectorPicture Characteristics Additional PrecautionsIllumination Near the Projector Unit Projection ScreenInstallation InstallationTaking OUT the Projector from the Carton Projector Section Front SideProjection InstallationProjection distance Lens shift Vertical cm Horizontal cmPortion of the projector to adjust the picture position Adjustment of Projection PositionAttachment of Antivibration Cushion Its heightPart Names and Functions Projector Section FrontProjector Section Rear Projector Section TOP AV Selector Section Front Part Names and FunctionsAV Selector Section Rear Pin No Signal Pin No Input signalDescription of Input Terminals Remote Control Using the Remote Control Putting Batteries in the Remote ControlPrecautions Effective Range for the Remote Control Connecting the Display to External Equipment One ferrite core For AV SelectorTwo ferrite cores For System Cable Connecting the Projector and the AV Selector Rear side of projectorRear side of AV selector VCR or other external components See P. Î Example of Connection to External ComponentsVCR DVD RECORDER/PLAYER Satellite Tuner Video Camera Videogame MachineFront side of AV Selector English When connecting to the rear side of the AV SelectorWhen Outputting Audio Signals to AN Audio Amplifier Basic Operations Turnig on the PowerTurning the Power to Standby Basic OperationsPress E to select OFF FINE-ADJUSTING the Screen Position Adjusting the Focus and Size of the PictureAdjusting the Rectangular Distortion of the Picture Press to register the adjustment resultPress CD to select Correct Keystone Result Reversing the PictureVideo Input Mode Selecting Input ModeRGB Input Mode Press the buttons to select the input modeConvenient Functions Other Basic OperationsWatching Pictures on the Wide Screen Switching Between Screen SizesPress  Press to select a desired Screen SizeAspect Ratio Screen SizeMenu Adjustment MenuPress E or F to select Picture Press to store Press when you finishPress C or D to select Tint Press E or F to change tint valuesAdjusting the Picture Setting the intensity of the light source lamp Precision SettingPicture Memory Precision Setting Adjusting the PictureAdjusting the Color Temp Setting Image Enhance Valid in the DVI-D mode onlySetting User Color Temp Image IdentifyReddish color Setting the Color FocusFrame Mode Making the Progressive Scan SettingsMotion Setting Jaggies FilterAdjusting Screen Position and Size Adjusting Screen Position PositionAdjusting Screen Size Size Adjustment Other AdjustmentsFeatures setup screen has the following 6 options Adjustment Item Contents of Adjustments OperationOn Screen Menu Other AdjustmentsSetting the Input Terminals Selecting the settings of Video Input terminal VIDEO1-4Video Format Other Settings Auto Off-NO SIGAudio input selection Specifying RGB Input Signal Code Setting Setting Exhibition Mode Exhibition ModeChanging background color to blue Blank Screen Displaying System Status Information Input Signal Video mode Input Sync. Signal typeInitialization of User Adjustment Value Press E or F to select FactoryPress C or D to select the Yes Precautions on AIR Filters and Lamp Protection Filter Cleaning and MaintenanceCleaning the AIR Filters and Lamp Protection Filter Clean the air filters and lamp protection filterReplacing the AIR Filters Care of the CabinetCare of the Lens Cleaning and Maintenance Unplug the power cord from the receptacleChanging the Lamp Póññêèé Português Italiano Français Precautions Before Obtaining ServiceCleaning the Screen Cleaning the Cabinet and Remote ControlOptions Main corresponding signals RGB mode Display dots x lines Main Supported SignalsVertical frequency Hz Signal Frequency kHz Frequency HzProjector SpecificationModel RegulationAV Selector for USE with the Projector Specification

LPF-QSD1W specifications

The Fujitsu LPF-QSD1W is an innovative device that has made waves in the landscape of portable computing and technology design. Renowned for its advanced features, this model is a testament to Fujitsu’s commitment to providing powerful and efficient technology solutions.

At the heart of the LPF-QSD1W is its advanced processing capabilities, which are designed to handle demanding tasks seamlessly. It employs state-of-the-art processors that ensure high performance, making it suitable for both personal and professional applications. Whether for multitasking in a corporate environment or engaging in intensive creative projects, this device delivers unmatched speed and efficiency.

One of the standout characteristics of the LPF-QSD1W is its exceptional display technology. The unit features a high-resolution display that offers vibrant colors and sharp details, making it ideal for graphic-intensive work and multimedia consumption. The visual experience is further enhanced by wide viewing angles and excellent brightness levels, ensuring that the content is viewable in various lighting conditions.

In terms of connectivity, the LPF-QSD1W is equipped with multiple ports and wireless technologies. This includes USB-C ports for fast data transfer, HDMI outputs for external display connections, and advanced wireless capabilities such as Bluetooth and Wi-Fi 6. These features enable users to connect to a plethora of devices with minimal hassle, making the LPF-QSD1W an adaptable companion for both work and play.

Another notable feature is its robust build quality. Designed to withstand the rigors of daily use, the LPF-QSD1W comes with durability features that protect it from physical damage. This makes it a reliable choice for professionals who require a dependable device to take on the go.

Moreover, the LPF-QSD1W emphasizes energy efficiency. It incorporates technologies that optimize power consumption, allowing for longer battery life without compromising performance. This ensures that users can work longer hours without the constant need to recharge.

In summary, the Fujitsu LPF-QSD1W is a well-rounded device combining powerful processing capabilities, stunning display technology, versatile connectivity options, and impressive durability. Whether for business, education, or entertainment, it stands out as a reliable choice for users who demand both performance and portability in their technology solutions.