Selecting Solo Voice | Roland AT20s guide

Selecting and Playing Sounds

■Selecting Solo Voice

The Solo section of the Upper keyboard is monophonic, that is, the Solo voice will only sound for the highest note played on the Upper keyboard. This allows you to play full chords and have the selected Solo voice playing the highest (solo) note.

fig.02-11

1	Solo
	Solo
	Level
Trumpet	Sax
Flute

1. Press the Solo [Trumpet] button (indicator lights).

The name of the selected voice appears in the display for a few seconds.

fig.02-12

Play the Upper keyboard. The selected voice will sound by the highest note played.

It is possible to change how a Solo voice will sound.

Normally, the Solo voice will be sounded by the highest note you play on the Upper keyboard, but you can make settings so that the last-played note will sound the Solo voice. You can also make settings so that the Solo voice will be sounded by all notes of the keyboard to which the Solo voice is assigned. For details refer to “Changing How the Solo Voice Responds (Solo Mode)” (p. 92).

24

Image 24

Roland AT20s owner manual Selecting Solo Voice, Press the Solo Trumpet button indicator lights

Contents

Page Important Safety Instructions 001 002a Using the Unit Safely Important Notes Before Using Floppy Disks Handling Floppy DisksHandling the Floppy Disk Drive Main Features Basic concepts of the Atelier series Main Features Conventions Used in This Manual Contents Contents Using the Play FunctionsUsing the Registration Buttons Adding Various Effects to a Voice Contents Settings for the Composer Adjusting the EffectsVarious Other Settings Edit Menu Editing Song Files Contents Connecting with External Devices Appendixes Memo Panel Descriptions Pedal Lower Disk Drive → p Lower Drums/SFX button → p Rotary Sound → p Setting Up the Music Stand Connecting the Power CordTuning On the Power Before You Start Playing Connecting a Microphone Using HeadphonesTurning Off the Power Some Notes on Using a Microphone Restoring All the Factory Default Settings Displaying Basic ScreensRhythm Screen Composer Screen Selecting and Playing Sounds Listening to the Demo Songs Selecting and Playing Sounds If the following screen appears Selecting Voices About the Voices and Parts Functions of the Upper/Lower/Pedal Bass Sound Select Buttons Selecting the Upper and Lower Voices Press the Pedal Organ button indicator lights Selecting Pedal Bass Voice Press the Solo Trumpet button indicator lights Selecting Solo Voice Selecting a Voice Using the Others Button 10 P.29 Adjust the Volume Balance Pedal Lower Transpose the Pitch in Octave Units Octave Shift Use the Value and + buttons to set the amount of shiftPress the Utility button Press the Drums/SFX button indicator lights Playing Drum Sound or Sound Effects on the KeyboardPlaying Drums from the Entire Lower Keyboard Drums/SFX Changing the Drum/SFX Set Press the Drums/SFX button once again Using the Rhythm Performance Using the Rhythms of the Disk ButtonSelecting a Rhythm Press a Rhythm button to select a Rhythm group Starting at the Press of a Button Starting with an Intro Press the Intro/Ending buttonPress the Start/Stop button Starting without an Intro Press the Start/Stop button Using the Rhythm Performance Press the Intro/Ending button Stopping the RhythmPlay either the Lower keyboard or the Pedalboard Stopping with an Ending Press the Intro/Ending button What is a Fill In? Adding Variety to the Rhythm and Automatic Accompaniment Playing the Count Sound at the End of the Intro Press the Arranger On/Off button indicator lights Playing Rhythm and Automatic AccompanimentChanging the Tempo Select a Rhythm p Press the One Touch Program button Press the Intro/Ending or Stop button to stop the Rhythm Using a Rhythm from a Disk Inserting and Ejecting a Floppy DiskReviewing the Styles on a Music Style Disk Press the Eject button Loading Disk Rhythms Into Internal Memory Rhythm To cancel the procedure, press the Display/Exit button Press the Harmony Intelligence button indicator lights Adding Various Effects to a VoiceChanging the Type of Harmony Intelligence Once again, press the Harmony Intelligence button Traditional Adding Modulation to the Sound Rotary Effect LED lit Fast Reverb Effect When Adding Sustain to the Upper or Lower Part When Adding Sustain to the Pedal Bass PartPress the Sustain Pedal indicator lights Press the Sustain Pedal button to turn off the indicator Using the Play Functions Transposing to a Different Key Transpose Buttons Press the Transpose and + buttons Adjusting the Overall Volume Using an Expression Pedal Adding Decay to the Sound Damper Pedal Using the Foot Switch Press the foot switch toward the left Using the Registration Buttons Storing Registrations How to Recall a Registration Recalling a RegistrationChanging the Timing of Recalling Registrations Automatically Registering When You Switch Panel Settings Assigning a Name to a Registration SetPage Copying Only the Name of a Registration Saving Registration Sets to a Floppy Disk Loading Previously Saved Registration Sets Into the AT-20S Loading a Set of RegistrationsPress the Load button to execute loading Page Deleting a Set of Registrations from a Floppy Disk What is a Track? Expression Pedal Operations Playing Back Performance Songs Stored on Floppy Disk SMF Music Files Eject button Enter the recording standby mode by pressing the Rec button Recording a PerformancePress the Play button to start recording Page Playing Back a Performance Song Add a Count Sound to Match the Timing CountPress the Play button to start playback To stop playback at any point, press the Stop button Press the track button once again indicator lights Track Assignments When Playing Commercial SMF Music FilesSilencing a Specific Track Track Mute Example Muting the sound for Upper Part Press the Stop button when your recording is completed Re-Recording Erasing a Performance Song Press the Function and Save buttons simultaneously Formatting Disks Press the Function button Press the Rec button again to perform the Format It is not possible to save during the Rename procedure Changing the Name of a Performance Song Rename Saving Performance Songs onto Floppy Disk SMF If the following screen will appear 27-2 Loading Performance Songs Into the AT-20S Layering a New Recording onto SMF Music Files Press the Play button to begin recordingPress the Stop button to stop recording Deleting Performance Songs Stored on Disk To delete the performance song, press the Rec button again Re-Recording Part of Your Performance Punch-in Recording To use Punch-in Recording, you can Press the Stop button to stop the song Recording and Layering Drum Parts Loop Recording Number of Measures for Loop Recording Settings for the Composer Changing the Key When Playing Back SongsChanging the Metronome Setting Count-in Recording Adjusting the Metronome Volume Setting the BeatChanging the Sound of the Metronome Function During Recording Function During Playback Switching the Display of Lyrics On or Off Muting Individual Channels of Performance Data Edit Menu Editing Song Files Delete a Specific Measure Delete Measure What is a Track? Delete the Recording from a Track Delete Track Erase Recording Erase Event 3 4 5 6 7 8 9 Copy Measures Copy Correct Timing Inaccuracies Quantize 26fig.10-27 Adjusting the Effects Changing the Reverb TypeChanging the Depth of the Reverb Changing the Wall Type Sustain EffectChanging the Sustain Length Various Other Settings Changing the Function of the Foot SwitchTurning Initial Touch On/Off Initial Touch Changing the Pedalboard Polyphony Pedal Bass Mode Changing the Sound Count Down Count Down Changing How the Solo Voice Responds Solo Mode Damper Pedal AssignmentGlide Destination Drums/SFX Set Harmony Intelligence TypeTurning Chord Intelligence On/Off Chord Intelligence Registration Arranger Update Arranger Settings Recall TimingTurning Chord Hold On/Off Chord Hold Registration Transpose Update Adjust the Standard Pitch Master TuneAdjust the LCD Contrast LCD Contrast Midi in Mode Selecting the Midi Transmit Channel Tx Midi Channel Setting PC Numbers PC Number Specifying Transmission of PC Numbers Send PC Switch Connecting with External Devices Names and Functions of Jacks and ConnectorsConnecting Audio Equipment Making the Connections Connecting a Computer Connection with an Apple Macintosh computer If You’re Using Midi Connecting the AT-20S to a Midi Instrument100 Troubleshooting 101 Troubleshooting 102 Display Messages 103 Display Messages 104 Voice List 105 Drum Set List 106 Drum Set List 107 Rhythm List Chord List 109 Chord List 110 Settings That Are Stored After the Power Is Turned Off 111 Glossary 112 About Atelier Series Sound Generator General MidiGS format SMF with Lyrics Midi Implementation Chart 114 Main Specifications Main Specifications Connectors Power SupplyPower Consumption Finish Dimensions Demo Song List AT-20SProfile Jonas Nordwall Ric IannoneRosemary Bailey 118 Index 119 Index 120 121 Information 122 Avis 02780045 ’03-11-3N