Roland AT20s Adjusting the Effects, Changing the Reverb Type, Changing the Depth of the Reverb

Adjusting the Effects

Changing the Reverb Type

You can select from the following 11 types of Reverb:

1.Press the [Utility] button.

2.Press the Menu [ ] and [ ] buttons to

select “Reverb Type.”

fig.11-04

3.Press the Value [-] and [+] buttons to select a Reverb type.

ROOM 1	Reverberation of a small room
ROOM 2	Reverberation of a small club
ROOM 3	Reverberation of a large room
HALL 1	Reverberation of a large concert hall
HALL 2	Reverberation of a small concert
	hall
SMALL CHURCH	The reverberation of a small church
LARGE CHURCH	The reverberation of a large church
CATHEDRAL	The reverberation of a cathedral
PLATE	A bright, metallic Reverberation
DELAY	An echo-like sound repeated sever-
	al times
PAN DELAY	Similarly to the above but where the
	sound is panned between the left
	and right speakers

To return to the basic screen, press the [Utility] or [Dis- play/Exit] button.

*It is not possible to modify the delay time (delay interval) when “PAN DELAY” is selected.

Changing the Depth of the Reverb

The depth of the Reverb can be set (0–10) for the following

Parts. You can make independent settings for each Part.

1.Press the [Utility] button.

2.Press the Menu [ ] and [ ] buttons to

select “Reverb Depth.”

fig.11-05

3.Press the Part [ ] and [ ] buttons to select the part whose reverb depth you wish to adjust.

Part Accomp (Automatic Accompaniment except

Bass), Rhythm, Drums/SFX, A.Bass (Bass part of Automatic Accompaniment), Pedal, L.Or- gan, L.Orch, U.Organ,U.Orch, Solo

4.Press the Value [-] and [+] buttons to adjust the setting.

Settings 0 – 10

AUTO (Accomp, Rhythm, A.Bass)

For the three Parts of the Accomp, Rhythm and Accompa- niment Bass, you have the option of selecting the “AU- TO” setting. Parts for which “AUTO” is selected will be set to the Reverb Depth that is most suitable for the Rhythm currently selected.

To return to the basic screen, press the [Utility] or [Dis- play/Exit] button.

88