Roland AT20s Saving Registration Sets to a Floppy Disk, If the following screen appears

Using the Registration Buttons

Saving Registration Sets to a Floppy Disk

With the settings of Registration [1]–[4] buttons considered as one set, a single floppy disk can store up to 99 sets of data. We recommend that complex panel settings or Reg- istrations you wish to keep be saved on disk. If AT-20S Registrations that you create are saved on a floppy disk, they can then be recalled later or recalled for use on another AT- 20S.

1.

2.

3.

fig.07-10

Make sure that the disk drive contains a disk that was formatted by the AT-20S.

Press the [Registration] button (indicator lights).

Press the Select [-] and [+] buttons to select the number that you wish to save to.

Numbers which have not been used in the Saving operation will be displayed as “- - -”.

To cancel the operation, press the [Registration] button.

4.

5.

6.

fig.07-11

Press the [Save] button.

Press the [Bwd] or [Fwd] button to select the format in which the data will be saved.

Press the [Save] button to execute the save operation.

When the Registration set is saved to the floppy disk, the indication of “- - -” will change to “USE.”

When saving is completed, the basic screen reappears.

If you have assigned a name, the Registration set will be saved to floppy disk with that name.

●If the following screen appears

If you press the [Save] button for a Registration number with the word “USE” indicated, the following message appears.

fig.07-12

❍If you wish to update the contents of the Registration deta

1. Press the [Rec] button.

The Registration will be rewritten.

54