Roland AT20s owner manual Display Messages, 104

Display Messages

■E.30

fig.E.30

Meanings:

•The Rhythm data is excessively large, and cannot be loaded.

•The performance data is excessively large, and cannot be loaded.

•Since the internal memory is full, recording or editing is not possible.

■E.40

fig.E.40

Meanings:

•The AT-20S cannot deal with the excessive MIDI data sent from the external MIDI device. Reduce the amount of MIDI data sent to the AT-20S.

■E.41

fig.E.41

Meanings:

•A MIDI cable or computer cable has been disconnected. Connect it properly and securely.

■E.43

fig.E.43

Meanings:

•The Computer Switch is set to a wrong position or the computer is set wrongly. Switch off the AT-20S then set the Computer Switch to the correct position and set the computer correctly. After that, switch on the AT-20S again.

■E.51

fig.E.51

Meanings:

•There is something wrong with the system. Repeat the procedure from the beginning.

■Others

fig.ot-02

Meanings:

•The AT-20S is warning you that its memory will soon become full to capacity, so not much more recording can be done.

fig.ot-03

Meanings:

•To carry out the procedure, you first need to erase perfor- mance data in the AT-20S. This message asks you to confirm that you don’t mind doing this. To erase the data, press the [Rec] button.

When you do not want to erase it, press the [Reset] button then save the data on disk.

fig.ot-04

Meanings:

•This Registration is already being used. To overwrite the previous Registration data in this memory, press the [Rec] button. If you decide to keep the previous Registration data in this memory and save your settings in an unused memory, press the [Reset] button, press the [Select] button to select a number for which “- - -” is displayed, and then save the data.

fig.ot-05

Meanings:

•There already is performance data having the same name on the disk.

To replace the existing data with the new version, press the [Rec] button. To save it as a separate new file, press the [Reset] button first. Then, after changing the name, save it on disk.

104