Adjusting the Effects
Changing the Wall Type
By changing the type of reverb (p. 88) you can experience the feeling of performing in various different locations, and by changing the Wall Type (wall material) you can make further adjustments to the way in which reverberation occurs.
1.Press the [Utility] button.
2.Press the Menu [ 
] and [ 
] buttons to
select “Wall Type.”
3.Press the Value
DRAPERY | Pleated curtain |
CARPET | Carpet |
ACOUSTIC TILE | Acoustical tile, |
| tile |
WOOD | Wood |
BRICK | Brick |
PLASTER | Plaster |
CONCRETE BLOCK | Concrete block |
MARBLE | Marble |
To return to the basic screen, press the [Utility] or [Dis- play/Exit] button.
Sustain Effect
Sustain allows you to add a Sustain effect or decay to each voice after the keys are released.
1.Press the [Utility] button.
2.Press the Menu [ 
] and [ 
] buttons to select “Sustain.”
3.Press the Part [ 
] and [
] buttons to select the part whose sustain you wish to adjust.
Keyboard Upper, Lower, Pedal
4.Press the Value [-] and [+] buttons to adjust the setting.
ON The Sustain effect is applied to the voices
OFF The Sustain effect is not applied to the voices
To return to the basic screen, press the [Utility] or [Dis- play/Exit] button.
Changing the Sustain Length
The sustain length can be set independently (SHORT, MIDDLE (Medium) or LONG) for the Upper and Lower keyboards and Bass Pedalboard. You can make a separate setting for each keyboard.
1.Press the [Utility] button.
2.Press the Menu [ 
] and [ 
] buttons to
select “Sustain Length.”
3.Press the Part [ 
] and [
] buttons to select the part whose sustain length you wish to adjust.
Keyboard Upper, Lower, Pedal
4.Press the Value [-] and [+] buttons to adjust the setting.
Settings SHORT, MIDDLE, LONG
To return to the basic screen, press the [Utility] or [Dis- play/Exit] button.
89
