Roland AT20s owner manual Copy Measures Copy

Edit Menu (Editing Song Files)

Copy Measures (Copy)

This function lets you copy a portion of recorded song to a different measure (bar) location in the same track.

*If a recording already exists at the copy destination, it will be erased.

Example: If you wish to copy measures (bars) 5–7 to measure (bar) 8

fig.10-15
	1	2	3	4	5	6	7
	1	2	3	4	5	6	7	8	9	10

1.Press the [Function] button.

2.Press the Select [-] [+] buttons to select “Edit Menu.”

3.Press the [Rec] button.

4.Press the Select [-] [+] buttons to select “Copy.”

fig.10-16

To cancel the operation, press the [Reset] button.

5.Press the [Rec] button.

6.Press the [Bwd]/[Fwd] buttons to select the

track whose recording you wish to copy.

fig.10-17

Settings: ALL, RHYTHM, ACCOMP, BASS, LOW-

ER, UPPER, SOLO, CONTROL

If you select “ALL”, the recording in all the tracks will be copied.

7.Press the [Rec] button.

8.Press the [Bwd] / [Fwd] buttons to specify “from” (copy start measure).

fig.10-18

9.Press the [Rec] button.

10.Press the [Bwd] / [Fwd] buttons to specify “for” (number of measures from the copy start mea- sure).

fig.10-19

To specify until the last measure (bar), set “for: ALL”.

11.Press the [Rec] button.

12.Press the [Bwd] / [Fwd] buttons to specify “to” (copy destination measure).

fig.10-20

If you select “END,” the data will be copied following the end of the last measure.

13.Press the [Rec] button.

14.Press the [Bwd] / [Fwd] buttons to specify “time” (number of times to copy the data).

fig.10-21

15.Press the [Rec] button.

The following screen appears.

fig.10-22

To cancel the operation, press the [Reset] button.

16.To execute the Copy function, press the [Rec] button once again.

When copying is complete, the basic screen reappears.

86