Roland AT20s owner manual Using the Registration Buttons, Storing Registrations

Using the Registration Buttons

The AT-20S allows you to store sound settings and panel settings such as 4 in the Regis- tration buttons. There are a total of 4 Registration buttons, and one set of panel settings can be stored in each, allowing you to register a total of 4 different panel settings. Each set of panel settings that has been stored in a Registration button is called a “Registra- tion.”

This provides a convenient way to change large numbers of panel settings during a per- formance, or to recall a complex panel setting.

fig.07-01

Write Manual 1 2 3 4

Registration

Settings that have been stored to Registration [1]–[4] buttons are remembered even if the power is turned off. If you wish to restore the settings stored in the Registration buttons to their factory settings, use the “Factory Reset” operation (p. 18).

Storing Registrations

1.

2.

Make all the panel settings that you wish to store.

While holding down the [Write] button, press one of the Registra- tion [1] – [4] buttons.

The panel settings will be stored in the selected Registration button.

With the settings of Registration [1] – [4] buttons considered as one set, a single floppy disk can store up to 99 sets of data (p. 54).

For details on the settings that are stored in a Registration, refer to “Settings That Are Stored in the Registration Buttons” (p. 111).

49