Record and Playback Your Performance

Changing the Number of Measures for Loop Recording

With the initial settings, Loop Recording will occur over one measure. In the Function menu you can change the number of measures over which Loop Recording will occur.

1.

2.

fig.08-36

Press the [Function] button.

Press the Select [-] and [+] buttons to select “Loop Recording.”

The Number of Measures for Loop Recording

3. Press the [Bwd] button and [Fwd] button to select the number of measures for Loop Recording.

4. Press the [Function] or [Display/Exit] button.

The number of measures for Loop Recording has now been specified.

Use the procedure for Loop Recording to begin recording.

Using Song with a Different Tempo Than That of the Performance Song

1. Insert the floppy disk containing the performance song whose tempo you want to change into the disk drive.

2. Use the Select [-] or [+] button to select the performance data you wish to load.

3. Press the [Load] button.

The selected performance data will be loaded into internal memory.

4.

5.

Determine the tempo with the Tempo [ ] and [ ] buttons.

Hold down the [Reset] button and press the [Rec] button.

78

Page 78
Image 78
Roland AT20s owner manual Number of Measures for Loop Recording