Roland AT20s owner manual Re-Recording, Press the Stop button when your recording is completed

Record and Playback Your Performance

Re-Recording

NOTE

fig.08-08

If you made a mistake in your performance during recording, you can re-record just a portion of the musical data in the track.

If you wish to re-record with different settings for voices, tempo, part balance, erase the recorded song (p. 66) and re-record again. If the Control track still contains data from before you re- recorded, the volume or sounds may change during playback.

3

Composer

Select

Demo

Load Function Save Registration

Rename Clear

Track

Rhythm	Accomp	Bass	Lower	Upper	Solo	Control
Reset	Stop		Play	Rec	Bwd	Fwd

5 4 2 1

1.

2.

Press the [Reset] button or the [Bwd] / [Fwd] buttons to move to the measure (bar) where you wish to start re-recording.

Press the [Rec] button to enter into the recording standby mode.

The [Rec] button indicator will light, and the indicators of the [Play] button and the track buttons of unrecorded tracks will blink. The track buttons of tracks already-recorded will light.

3. Press the Track button which you wish to re-recording (indicator blink).

The song data of the specified Track (with the exception of the Control Track) will be erased as new song data is recorded.

When the indicator of a Track is lit constantly, no song data has been recorded on that Track.

4. Press the [Play] button to start recording.

When you press the [Play] button, the metronome will play two measures (bars) of count-in before recording begins.

5.

NOTE

Press the [Stop] button when your recording is completed.

The button indicators of tracks which were re-recorded will change from flashing to be- ing constantly lit.

If you wish to keep the existing Expression Pedal data, and record only the panel operations, you can make settings to prevent the operation of the Expression Pedal from being recorded (p. 81).

You can use punch-in recording (p. 75) to re-record only the area that you specify.

65