Roland AT20s Transpose the Pitch in Octave Units Octave Shift, Press the Utility button

Selecting and Playing Sounds

Transpose the Pitch in Octave Units (Octave Shift)

The pitch of the sound played by the keyboard can be adjusted in one-octave steps.

You can apply an Octave shift to the following 6 Parts:

All of the Upper and Lower Parts (Organ/Orchestral)

The Pedal Parts

The Solo Part

1.

2.

3.

fig.02-16

4.

Press the [Utility] button.

Press the Menu [ ] and [ ] button to select “Octave Shift.”

Use the [ ] and [ ] Part buttons to select a performance Part to which you wish to apply an Octave Shift.

Part: Pedal, L. Organ, L. Orch, U. Organ, U. Orch, Solo

Use the Value [-] and [+] buttons to set the amount of shift.

The value can be set to a range of +/- 3 octaves.

5.

NOTE

Press the [Utility] button.

The basic screen reappears.

Please note that when you apply the Octave Shift function to certain voices, their pitch could be stretched beyond their recommended note ranges, and they may not sound as expected. Care should be taken when using Octave Shift.

27