Roland AT20s owner manual If the following screen will appear, 27-2

Record and Playback Your Performance

4. Press the [Save] button to confirm the format.

fig.08-22

NOTE

NOTE

fig.08-27-2

While performance data is being saved to the floppy disk, the following display appears.

Music data that was saved in Atelier format cannot be played back correctly on instruments other than the Atelier series.

Saving performance data in SMF format (SMF) requires a longer time than saving it in Atelier format (ORIGINAL).

Performance data that was saved in SMF format will be indicated by a “ ” symbol.

●If the following screen will appear

If the floppy disk already contains performance data of the same name, the following display will appear.

fig.08-23

❍If you wish to update the contents of the performance data

1. Press the [Rec] button.

❍If you wish to save the data without erasing the performance data already on floppy disk you must rename the song

1. Press the [Reset] button to cancel saving.

2. Change the name (p. 69), and perform the Save procedure once again.

71