![](/images/new-backgrounds/1229287/229287159x1.webp)
Settings for the Composer
Adjusting the Metronome Volume
You can adjust the volume of the metronome.
1.Press the [Function] button.
2.Using the Select
ronome Vol.”
3.Press the [Bwd]/[Fwd] buttons to select the desired volume level
Increasing the value will raise the volume of the metro- nome.
To return to the basic screen, press the [Function] button or the [Display/Exit] button.
Changing the Sound of the Metronome
You can choose one of 4 different sounds for the metronome.
1.Press the [Function] button.
2.Press the Select
“Metronome Sound.”
3.Press the [Bwd] / [Fwd] buttons to select the type of sound for the metronome.
CLICK&BELL Conventional metronome sound ELECTRONIC Electronic metronome sound VOICE ENG. Human voice (English)
VOICE JPN. Human voice (Japanese)
To return to the basic screen, press the [Function] button or the [Display/Exit] button.
➔This setting remains stored in memory even while power is turned off.
Setting the Beat
This setting determines the beat to be used when recording
performance songs.
Numerator | 1 or higher (denominator x |
Denominator | 2, 4, 8, 16 |
1.Press the [Function] button.
2.Using the Select
“Beat.”
3.Press the [Bwd]/[Fwd] buttons to set the numeric value for the numerator.
4.To set the denominator, press the [Rec] button to move the cursor from the numerator to the denominator.
Press the [Rec] button again if you wish to return to the numerator.
5.Press the [Bwd]/[Fwd] buttons to set the numeric value for the denominator.
To return to the basic screen, press the [Function] button or the [Display/Exit] button.
*When recording your performance with playing Rhythm perfor- mances or Automatic Accompaniment, the beat is set automati- cally.
*You cannot change the beat of previously recorded songs.
80