Roland AT20s owner manual Loading Previously Saved Registration Sets Into the AT-20S

Using the Registration Buttons

❍If you wish to save the data without erasing the Registration set already on disk

1. Press the [Reset] button to cancel the procedure.

Rewriting of the Registration will be canceled.

2.

3.

Press the Select [-] [+] buttons to select a number for which “- - -” is displayed on the upper right of the screen.

Press the [Save] button to save the Registration set.

When the data has been saved, the basic display reappears.

When the Registration set is saved to the floppy disk, the indication of “- - -” will change to “USE.”

Loading Previously Saved Registration Sets Into the AT-20S

Here’s how to recall a previously saved Registration set from the floppy disk into the memory of the AT-20S.

Registrations can be selected in the following two ways.

•Loading a Set of Registrations

You can load a “set” (a collection of settings for Registration buttons [1]–[4]) from floppy disk.

•Loading an Individual Registration

You can load settings for an individual Registration button [1]–[4].

Be aware that when you load Registrations from a disk, the Registrations that were previously

NOTE in internal memory will be lost. It is a good idea to save important Registrations to floppy disk (see p. 54).

■Loading a Set of Registrations

Registrations Sets saved to a floppy disk can be loaded back into the instrument.

1.

2.

3.

fig.07-13

4.

Insert the floppy disk into the disk drive.

Press the [Registration] button (indicator lights).

Press the Select [-] and [+] buttons to select the Registration set that you wish to load.

To cancel the procedure, press the [Registration] button.

Press the [Load] button to execute loading.

When loading is complete, the basic screen reappears.

55