Frigidaire FDB2410HIS, FDB2410HIB Status Indicator Lights, Child Lock Controls, Status Window

Operating Instructions (continued)

Status Indicator Lights

The WASHING light (some models) comes on at the beginning of cycle and remains on until the end of the main wash.

The DRYING light (some models) indicates the drying portion of the cycle. The light will come on when either drying option is selected.

The LOW RINSE light (some models) comes on at the end of a cleaning cycle when the rinse agent reservoir is low. The light will remain on through 5 successive cycles or until the reservoir is filled.

The CLEAN light (some models) will come on at end of cycle and remain on until door is opened.

Child Lock Controls

To prevent children from accidently changing the dishwasher cycle or starting the dishwasher, lock the dishwasher controls by pressing and releasing the or the NO HEAT DRY pad for 3 seconds while the door is latched. An indicator light on the lock graphic pad will illuminate when the controls

are locked and no new selections can be made until the lock is released. To unlock the controls, press the NO HEAT DRY pad until the indicator light goes out.

Status Window

The STATUS window, indicates the following activity:

1H-24H………..Number of delay start hours.

The last hour will count down in minutes.

CL……………… Close dishwasher door. The

status indicator lights will also flash to indicate current cycle status.

Hd ...........…..… Indicates a water heat delay.

MINUTES…...… Number of minutes left in cycle

(1-99). If cycle is longer than 99 minutes, a small light will appear in the lower right corner and remain on until time counts below 99.

PF……………… Appears in window when

dishwasher is first installed, or when power has been interrupted. HI-TEMP WASH and NO HEAT DRY indicator lights will also flash. To clear, touch START/CANCEL pad.

LO.........................Appears in window when the

rinse aid dispenser is low and needs to be refilled.

7