Operating Instructions
Appearance may vary from your model.
Very Important
Operating Your Dishwasher!
Normal Operating
Sounds
This dishwasher does not sound like most
Your dishwasher uses energy efficient motors for the wash and drain portions of the cycle you select. Each cycle has a series of water fills and drains for washing and rinsing dishes. As each cycle begins, you
The next sound you will hear is the splashing water as it enters the tub. Then the spray arms rotate and circulate water.
PLEASE BE ADVISED: If you compare this dishwasher to previous models, you may be surprised at what you DON'T hear!
Getting Started
1.Load dishwasher (See Preparing and Loading Dishes).
2.Add detergent (See Dishwasher Dispenser & Detergents).
3.Add rinse aid, if needed (See Rinse Aid).
4.Close door to latch.
5.Select desired CYCLE (See Cycle Chart). The indicator light above the pad will glow when selected.
6.Select desired OPTIONS (See Energy Options). The indicator light above the pad will glow when selected.
7.Run hot water faucet nearest dishwasher until water is hot. Turn water off.
8.To start, press START/CANCEL pad.
Note: The dishwasher is programmed to remember your last cycle so you do not have to reset each time. To start the dishwasher using the same cycle and options selected on the previous wash, just press the START/CANCEL pad.
Wash Cycle Selections
Note: Cycle times are approximate and will vary with options selected. Hot water is necessary to activate dishwasher detergent and melt fatty food soils. An automatic sensor will check the incoming water temperature and, if it is not hot enough, the timer will be delayed for automatic water heating in the main wash of all cycles. This happens even when
4
