Fujitsu LPF-QSD1W user manual Main Supported Signals, Vertical frequency Hz Signal

MAIN SUPPORTED SIGNALS

This display can store the latest four types of signals for RGB adjustment value. The fifth input signal will replace the adjustment value of the first input signal.

To do this, select a desired signal and follow the instructions in "Adjusting Screen Position and Size" on P. E-46 to adjust the parameters. When you finish, the settings will be automatically stored. Thus, when the display receives that signal, pictures will be displayed in accordance with the settings you most recently selected.

Main corresponding signals (RGB mode)

Display (dots x lines)	Horizontal frequency (kHz)	Vertical frequency (Hz)	Signal	DVI-D
640 x 480	31.47	59.94	VGA
640 x 480	37.50	75.00	VGA 75 Hz
640 x 480	43.27	85.01	VGA 85 Hz
720 x 400	31.47	70.09	400 lines
800 x 600	37.88	60.32	SVGA 60 Hz
800 x 600	46.88	75.00	SVGA 75 Hz
800 x 600	53.67	85.06	SVGA 85 Hz
1024 x 768	48.36	60.00	XGA 60 Hz
1024 x 768	60.02	75.03	XGA 75 Hz
1024 x 768	68.68	84.99	XGA 85 Hz
1280 x 1024	63.98	60.02	SXGA 60 Hz
1280 x 1024	79.98	75.03	SXGA 75 Hz
1600 x 1200	75.00	60.00	UXGA 60Hz
848 x 480	31.02	60.00
852 x 480	31.72	59.97
1360 x 768	47.71	60.01
720 x 485	15.73	59.94	60 fields
720 x 575	15.63	50.00	50 fields

*With some input signals, "Out of range" may appear even when the horizontal and vertical frequencies are within their permissible ranges. In this event, match the input signals to another frequency rather than those listed above.

*In the DVI-D mode, the input signal can be restricted partly.

In the Comp.video and Video/S-video, the display has been factory-set as follows for different input signals:

Main corresponding signals (Comp.video mode)

Horizontal	Vertical	Signal	HDMI
frequency (kHz)	frequency (Hz)
15.73	59.94	SDTV 480i
15.63	50.00	SDTV 576i
31.47	59.94	SDTV 480p
31.25	50.00	SDTV 576p
45.00	60.00	HDTV 720p
37.50	50.00	HDTV 720p
33.75	60.00	HDTV 1080i
28.13	50.00	HDTV 1080i

Main corresponding signals (Video, S-video mode)

Horizontal	Vertical	Signal
frequency (kHz)	frequency (Hz)
15.73	59.94	NTSC
15.63	50.00	PAL
15.63	50.00	SECAM
15.63	59.52	PAL60
15.63	50.00	N-PAL
15.73	59.95	M-PAL
15.73	59.94	4.43NTSC

Note

•Depending on the input signal, the display may show pictures of reduced size due to size reduction and interpolation.

•"Out of range" appears if the display receives a signal whose characteristic does not fall within the display's permissible range.

•You can check input signals through "Information" on the FEATURES Menu screen. (See P. E-52.)

•In order to facilitate the explanations, pictures and diagrams in this manual may differ slightly from the actual items.

•All terms (i.e., company and product names) used in this document are trademarks or registered trademarks.

E-60