Fujitsu P2X0-0202-01EN manual Target Device Setup and Maintenance

Chapter 1 About ETERNUSmgr

List of components that can be monitored for each target device

Component				Device model
		GR710		GR720, GR730		GR740, GR820, GR840
Controller		Yes		Yes			Yes
enclosure
Drive		No		Yes			Yes
enclosure
Battery		No		No			No
enclosure
FC cable		No		Yes			Yes
RCI cable		No		Yes			Yes
DEI cable		No		No			No
PANEL		No		No			No
Battery unit		No		No			No
Battery charger		No		No			No
unit
				Device model
		ETERNUS3000					ETERNUS8000
Component			models	ETERNUS2000	ETERNUS4000		,
	model 50	models 80	200, 300,		models 80 and		ETERNUS4000
			400, 500,		100		,
		and100
			600, and				ETERNUS6000
			700
Controller	Yes	Yes	Yes	Yes		Yes	Yes
enclosure
Drive	No	Yes	Yes	Yes		Yes	Yes
enclosure
Battery	No	No	Yes	No (*1)		No	No
enclosure
FC cable	No	Yes	Yes	No		Yes	Yes
RCI cable	No	Yes	Yes	No		Yes	No
DEI cable	No	No	No	No		No	Yes
PANEL	No	No	No	No		No	Yes
Battery unit	No	No	No	No		No	Yes
Battery	No	No	No	No		No	Yes
charger unit
				(Yes: Can be monitored, No: Cannot be monitored)
*1: Battery is installed in the controller enclosure

Besides being able to detect a change in a target device's condition from normal to faulty operation and vice-versa, the device monitoring function is also able to detect changes in the type of problem encoun- tered (such as the change from Offline to Alarm).

■Target Device Setup and Maintenance

This allows the target device to be setup and maintained. This is done by means of the following functions:

•Target Device Settings

•Collecting the Log Information of the Target Device

1

P2X0-0202-01EN ETERNUSmgr User Guide -Introduction-

All Rights Reserved, Copyright © FUJITSU LIMITED 2007

5