7.5ESC/POS compatible command set
7.6Escape sequences, overview.
ESC c 4 | Select Paper Near End Sensors to stop printing |
HT | Horizontal Tab |
LF | Print and Line feed |
FF | Print and return to standard Mode |
CR | Print and carriage return |
DLE EOT n | Real Time status transmission |
DLE ENQ n | Real time request to printer |
CAN | Cancel print data in page mode |
ESC FF | Print data in page mode |
ESC SP n | Set right side character spacing |
ESC ! n | Select print mode(s) |
ESC$ nL nH | Set absolute print position |
ESC % n | Select /cancel |
ESC & y c1 c2 [x1 |
|
d1…dy * x1]…[xk | Define user defined characters |
d1…dy * xk] |
|
ESC * m nL n H [d]k | Select bit image mode |
ESC - n | Turn underline mode on/off |
ESC 2 | Select |
ESC 3 n | Set line spacing |
ESC = n | Set peripheral device |
ESC ? n | Cancel user defined characters |
ESC @ | Initialize printer |
ESC [n] k NUL | Set horizontal tab position |
ESC E n | Turn emphasized mode on/off |
ESC G n | Turn on/off double strike mode |
ESC J n | Print and feed paper |
ESC L | Select page mode |
ESC R n | Select an international character set |
ESC S | Select standard mode |
ESC T n | Select print direction in page mode |
ESV V n | Turn 90°clockwise rotation mode on/off |
ESC W xL xH yL yH | Set printing in page mode |
dxH dyL dyH |
|
ESC c 5 n | Enable/Disable panel buttons |
ESC c 3 n | Select paper near end sensors to output end signals |
ESC a n | Select justification |
ESC \ nL nH | Set relative print position |
ESC d n | Print and feed n lines |