Fujitsu PRN607-S manual Power supply, Settings

Page 8

MAN607-S

(a)To connect or remove the connector, always turn off the power in advance. If the connector is connected or removed while the power to the printer is on, errors may occur.

(b)The connector of each cable must be correctly locked and connected. The connector at the head side has no lock feature. Check that the connector at the head side is completely inserted.

(c)To install the interface, carefully check each cable so that excessive force is not applied to each cable. Especially, carefully check the head connection cable because it affects the head pressure force. If the print head connector is not completely connected, overheating or burning may occur in the print head.

(d)Be sure to add grounding cable from printer body to interface ground. Make sure that ground is present at any mechanical settings, like head up and paper out.

2.4Power supply

Single power supplies for the PRN607-S controller board. Voltage range is 18-26VDC. 5A minimum @ 24V. Make sure that voltages never exceed 26VDC.

(a)The power supply unit that satisfies the specified specifications must be used. If a power supply unit that does not satisfy the specified specifications is used, normal operation is not assured and errors may occur.

(b)To turn on or off the power, a protective circuit must be mounted on the control board in advance. For safety, the following voltage change conditions must be satisfied:

2.5Settings

Following below description can change default settings. Baud rate is default 115.200, however standard PC´s today cannot handle this Baud rate. Windows OS does not support speed higher than 115.200 Baud, even when setup menus can be set to higher speed. In order to obtain higher

28-03-2003 Page 2-8 of 53

Page 7 Page 9
Image 8
Page 7 Page 9
Contents For Fujitsu Thermal Printers FTP607MCLXXX Series Safety Precautions Copyright 1999-2003 by I/F-COM A/S All rights reserved1-3 Specifications Function Maintenance APS Compatible Command SET Installation FTP627MCLxxx FTP637MCLxxxUnpacking LabelsPower supply Settings2-9 2-10 Serial Input/Output 2-12 2-13 2-14 Specifications Irda communication General Serial communicationUSB communication Firmware upgrade Auto form feedCharacter design 4-19 Printer commands I/F-COM simple command setAscii EOT Ascii ENQAscii ACK Ascii BELAscii DLE Ascii DC1Ascii DC2 Ascii DC3Ascii DC4 Ascii NAKAscii ETB Ascii CanAscii SUB Ascii ESC ZMAN607-S Automatic sending status Name Format FTP607MCLXXX 4-28 EAN8 UpcaEAN13 MAN607-S Code128 barcode table Black Mark Name Set black mark parameters Format D1,d2,..,dX Escape Sequences Ascii Function Daily use Store/TransportElectrical Data Mechanical DataEnvironmental Data EMC & ESCTemperature Test Connector Pin Assignment Pin FunctionLED1+ LED2+ INPUT1 INPUT2 TBAPin Function +5V Pin GND 24VDCUSB USB+ GND LED GND CUTDSR CTSMechanical Drawings Seiko compatible command set AppendixFujitsu compatible command set ESC RSESC US ESCCommand list description 7-45 7-46 GS E APS compatible command setESC S 7-48 ESC L ESC/POS compatible command setESC FF 7-50 7-51 Optional sensor description Top view Bottom viewRED White Black

PRN607-S specifications

The Fujitsu PRN607-S is a high-performance printing solution designed to meet the needs of modern businesses. This thermal printer stands out for its speed, efficiency, and reliability, making it an ideal choice for various applications such as retail, hospitality, and transportation.

One of the main features of the PRN607-S is its impressive printing speed, which can reach up to 300 mm per second. This high speed ensures that transactions are processed quickly, reducing wait times for customers and improving overall operational efficiency. The printer also has a high-resolution print capability of 203 dpi, which ensures sharp and clear text, barcodes, and graphics, making it suitable for printing receipts, labels, and tickets.

The PRN607-S employs advanced thermal printing technology, which minimizes the need for ink or toner, reducing operational costs and waste. This environmentally friendly approach also ensures low maintenance, as there are fewer components to replace. The printer supports a wide range of media types and sizes, allowing businesses to customize their printing options according to specific requirements.

Connectivity is another critical aspect of the Fujitsu PRN607-S. It comes equipped with multiple interfaces, including USB, Ethernet, and optional Bluetooth capabilities. This flexibility allows for seamless integration with various point-of-sale systems and mobile devices, streamlining the printing process. Users can easily connect the printer to a network, enabling centralized management and monitoring.

The design of the PRN607-S focuses on user-friendliness and durability. It features an easy-to-load paper compartment and a compact footprint, making it suitable for space-constrained environments. Additionally, the printer's robust construction ensures dependable performance even in high-demand situations, reducing downtime and service interruptions.

Security features are also vital in today's digital landscape, and Fujitsu has incorporated options that protect sensitive data during printing. By employing encryption and safety protocols, the PRN607-S helps to safeguard business information.

Overall, the Fujitsu PRN607-S is a versatile and reliable thermal printer that delivers high-speed performance, high-quality output, and flexible connectivity options. Its cutting-edge technology, user-friendly design, and enhanced security features make it an excellent choice for businesses aiming to improve their printing processes while maintaining a focus on efficiency and sustainability. With the capability to meet diverse printing needs, the PRN607-S is positioned as a leading solution in the crowded printer market.
Top Page Image Contents