Fujitsu FTP-621MCL102, FTP-621MCL101, FTP-621DCL002 manual Designation, General Specifications

FTP-621MCL101/102

■ DESIGNATION

	Item	Part number
Printer mechanism	Front paper insertion type	FTP-621MCL101
	Rear paper insertion type (supports thick paper)	FTP-621MCL102
Interface board		FTP-621DCL002
	Micro Controller Unit	FTP-621CU102
LSI
		FTP-633GA101
	Gate Array

■GENERAL SPECIFICATIONS

	Item					Specifications
Printing method			Thermal-sensitive line dot method
Dot structure			448 dots/line
Dot pitch (Horizontal)			0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical)			0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area			56 mm
Number of columns			37 columns/line (maximum)—Alphanumeric KANA
Maximum printing speed			800 dotlines/s (100 mm/s) maximum
			JIS ANK	: 128		International characters : 130
Character types			Semi-graphic : 63			ASCII small characters : 31
			Download	: 384
Character composition, dimensions (H×W),			24 × 12 dots, (3.0 × 1.5 mm), 37 columns
			32 × 16 dots, (4.0 × 2.0 mm), 28 columns
Number of columns (standard)			24 × 24 dots, (3.0 × 3.0 mm), 18 columns
			32 × 32 dots, (4.0 × 4.0 mm), 14 columns
Interface			1) Centronics standard			2) Bus interface*1
			24VDC ± 5%, average:*2
			0.25 (1.29) A (at		25 mm/s printing speed, 25% printing ratio)
		For head	0.43 (1.72) A (at		50 mm/s printing speed, 25% printing ratio)
Power supply			1.66 (3.01) A (at 100 mm/s printing speed, 25% printing ratio)
			( ): Peak
		For motor	24VDC ± 5%, 1.0 A maximum
		For logic	5VDC ± 5%, 0.5 A maximum
Weight			Mechanism: approximately 210 g. Interface board: approximately 100 g
Dimensions		Mechanism	105 (W) × 48 (D) × 28.0 (H) mm (excluding connector)
		Interface board	140 (W) × 89 (D) × 24.0 (H) mm

(Continued)

2