your telephone sets and other telecommunication devices. The second method requires a splitter and is explained in Chapter
4.If it is determined that a splitter is required, it will be installed by your DSL service provider.
Whether microfilters or a splitter is installed, a DSL modem allows telephone conversation and data downloads simultaneously over the existing telephone line. The microfilters and splitter are completely passive. The telephone service will work, even in instances of power outage. The DSL modem encodes the data sent from the PC and sends it to a corresponding DSL modem located at the local service provider’s office.
1.2 Unpacking Instructions
Before unpacking, make a preliminary inspection of the shipping box. Any evidence of damage should be noted and reported immediately to a customer support center.
Note: The customer support information can be found in the product information packet provided by your DSL service provider. Keep the shipping boxes and packing material for return.
It is recommended that you unpack the equipment on a clean, flat surface.
1.Place the shipping box upright. Cut the sealing tape and then open the flaps.
2.Take out the items in the box. Inspect the product for damage and verify that all parts are included.
3.Report any damage or missing parts to the customer support center.
2