HOW TO USE THE M~UTE/SECO~ TMER
The Minute/Second Timer
The Minute/Second Timer has three timing functions:
●It operates as a minute timer.
●It can be set to delay cooking.
●It can be used as a hold setting after defrosting.
The Minute/Second Timer operates without microwave energy.
Using a Holding Time
The Minute/Second Timer can also be used to program a “holding time” between microwave cooking functions. The time can range from one second to 99 minutes and 99 seconds. A holding or standing time may be found in some of your own recip~s or in a ~ookbook.
How to Time a 3-Minute Phone Call
Step 1: Touch MIN/SEC TIMER pad.
Step 2: Touch 3 and MINUTE pad (for 3 minutes and no seconds).
Step 3: Touch START. Display shows time counting down. The timer signals when time is up.
Programming Delayed Cooking
To delay cooking up to 99 minutes and 99 seconds, touch either TIME COOK I & II, TEMP COOK & HOLD or AUTO ROAST and enter cook time, temperature or code. Touch MIN/SEC TIMER and enter number of minutes to delay cooking. When
delaying Temp Cook & Hold or Auto Roast cooking, be sure probe is in food. Touch START.
Timer will count down to zero and cooking will begin.
How to Defrost, Hold and Time Cook
Let’s say you want to defrost a frozen casserole for
15 minutes, hold for 10 minutes and then Time Cook for 25 minutes. Here’s how to do it:
Step 1: Take casserole from freezer and place in oven.
Step 2: Touch TIME
m‘EFRosTpad
Step 4: Set standing or hold time by touching MIN/SEC TIMER
mpad
Step 5: Touch 1,0 and MINUTE pad to hold for ten minutes.
n Step 6: Touch TIME
m
c)
Step 3: Touch pads 1,5 and MINUTE pad for 15 minutes defrosting time. (Defrosting is automatically set on power level 3 but can be changed by touching
TIME COOK COOK I &II pad.
I &II
Step 7: Touch 2,5 and MINUTE pad for 25 minutes of cooking time.
the POWER LEVEL pad and the desired power level.)
START
Step 8: Touch START. As each function is automatically performed, oven display shows
ninstructions entered and the function. When time is up, the oven signals and flashes “End.”
10
