GE JEM31M Your Touch Control Panel, “Error” Appears on Display, “PROBE” Appears on Display

YOUR TOUCH CONTROL PANEL

The Touch Control Panel allows you to set the oven controls with the touch of a finger. It’s designed to be easy to use and understand.

“Error” Appears on Display:

●During Auto Cook, Reheat or Popcorn program,

the door was opened before steam could be detected.

●No steam was detected by sensor within four minutes and 10 seconds after start of Popcorn program.

“PROBE” Appears on Display:

●Probe has been forgotten when Auto Roast or Temp Cook & Hold function is being used.

●Probe is not securely seated in oven wall receptacle.

1.DISPLAY. Displays time of day, time or temperature during cooking functions, power level being used, cooking mode and instructions.

2.TIME DEFROST. Gentle thawing at automatic power level 3 (Low).

3.TIME COOK I & II. Microwave for a selected amount of time using automatic power level 10 (High).

4.POWER LEVEL. Touch this pad after you enter the cooking time if you want to change from automatic power level 10 (High) for cooking or power level 3 (Low) for defrosting.

5.MIN/SEC TIMER. This feature uses no microwave energy. It functions as either a kitchen timer, as a holding period after defrost or as a delay timer before time or temperature cooking.

6.AUTO COOK. Touch this pad and then a number pad for desired code number, and oven automatically microwaves at pre-programmed power levels and determines the proper amount of cooking times until the food is done and oven shuts off.

7.POPCORN. Touch this pad and START, and the popcorn sensor determines the right cooking time. The microwave popcorn feature is designed to be used only with prepackaged microwave popcorn weighing 3.0 to 3.7 ounces.

8.EXPRESS COOK. Touch the number 1 through 5 pads for 1 to 5 minutes of cooking at power level 10. For example, touch 2 then START for 2 minutes at power level 10.

9.CLOCK. Touch this pad to enter time of day or check time of day while microwaving. To set clock, first touch CLOCK pad and then enter time of day. For example, if time is 1:30, touch number pads 1,3, and O and “1:30” will appear in display. Then touch START or CLOCK pad. To reset or change time, simply repeat this process.

10.ADD 30 SECONDS. Press this pad to add

30 seconds to the cook time as it’s counting down.

11.AUTO START~EMINDER. Allows YOU to program your oven to begin cooking at a later time of day—up to a 12-hour delay. The Reminder feature can be used like an alarm clock.

12.START. After all selections are made, touch this pad to stati the oven.

13.AUTO DEFROST. Touch this pad and enter food weight. The oven automatically sets power levels and defrosting time.

14.TEMP COOK & HOLD. Use the temperature probe to cook by using a preset temperature. Once food reaches preset temperature, oven switches to HOLD setting and maintains that temperature until you touch the CLEAWOFF pad.

15.AUTO ROAST. Insert probe, touch this pad, and desired number pad for code to slow-cook or temperature cook meat with automatic preset program.

16.AUTO REHEAT. Use Auto Reheat for quick reheating of a variety of foods using different times and power levels.

17.NUMBER PADS. Touch these pads to enter cooking, defrosting time, time of day, temperature, power level, Auto Codes or food weights for Auto Defrost.

18.MINUTE. Use with number pads to enter whole minutes. For example, for 4 minutes touch 4 and

MINUTE.

19.CLEAWOFF. When touched, it shuts off the oven and erases all settings (except time of day).

8