Fujitsu TE988G user manual Tilt Swivel & Base

Page 5

Fujitsu TE988G Color Monitor

Installation

Tilt Swivel & Base

1.Turn the monitor upside down.

2.Turn the base upside down. Insert its four hooks into the four slots on the bottom of the monitor. (Point the hooks on the base toward the front of the monitor)

Figure 1

3.Push the tilt swivel and base in the direction of arrow (!) as indicated in Figure 2 to lock the hooks.

Figure 2

Image 5

Contents Table of Contents FCC Information Important Safeguards Change without notice Tilt Swivel & Base Pin Signal Connecting the monitorShows the position of following operating units Contrast & Brightness Adjustment OperationPhase/V-Center Pincushion & Trapezoid function window Phase & V-Center function windowSize & V-size function window Parallelogram & Tilt function window Pin Balance & Corner function windowOSD position function window RGB Color Temperature function windowRGB Value Setting Tools function window Language function windowExit OSD menu function window V60.3 HzCRT Size Problem Items to check Trouble Shooting