Fujitsu B19-5 ECO manual Adjusting the height, Adjusting the inclination, Adjusting the rotation

Page 18

Getting started

Adjusting the height

The height of the monitor can be adjusted by approximately 120 mm.

Grasp the monitor with both hands on the right and left edge of the casing and move it upward or downward.

Adjusting the inclination

Hold the monitor with both hands on the left and right sides of the casing and move it to the desired angle.

Adjusting the rotation

The monitor can be horizontally rotated by ± 45° from its centre position.

Grasp the monitor with both hands on the right and left edge of the casing and turn it to the desired position.

Adjusting portrait format

The monitor can be rotated from horizontal format (landscape mode) into vertical format (portrait mode).

Grasp the monitor with both hands on the right and left edge of the casing, move it into the highest position and turn it clockwise until it is in the portrait position.

For you to be able to display the screen contents in portrait mode, your graphics card will also need to support this function or you will need to use special software.

In the OSD menu you have the option of switching the OSD manually from landscape mode to portrait mode (see "Changing the monitor settings using the OSD menu", Page 17).

To reset the monitor to landscape mode, the monitor should be turned anti-clockwise. The OSD display can be reset again in the OSD menu.

10

A26361-K1317-Z220-1-7619, edition 2

Image 18
Contents B17-5 ECO/B19-5 ECO Do you have Page Copyright Fujitsu B17-5 ECO / B19-5 ECO Page Contents Contents Your LCD screen Target groupYour LCD screen Notational conventions Not switch off the deviceFurther information This fontSafety instructions Important notesImportant notes Power cable Cleaning the deviceTransporting the device CE marking Energy StarDisposal and recycling RecupelUnpacking and checking the delivery Setting up the deviceGetting started Getting startedSetting up an ergonomic video workstation 50 cm Adjusting the rotation Adjusting the heightAdjusting the inclination Adjusting portrait formatRemoving monitor base Connecting the device Connecting cables to the monitorConnecting cables to the computer Operation Switching the device on and offLED indicator Status OperationStage Operation Power saving mode Normal Green Standby Compatible ModeChanging the monitor settings Performing auto-adjustment of the monitorSelecting input signal D-SUB/DVI-D Locking the OSD menu Changing the monitor settings using the OSD menuActivate/deactivate ECO operating mode Locking the ON/OFF buttonPress the SELECT/MENU activate the OSD menu Adjusting the brightness and contrast OSD menu functionsAdjusting the picture size and position Adjusting the volumeSetting the colour temperature and colours Adjusting the display of the OSD menu Setting functions in the Advanced menuDisplaying information Troubleshooting TroubleshootingHaving this problem? Check the following points Picture disturbances vertical lines Press Button to perform Permanently unlit or lit pixels Technical specification Dimensions and weightAccessories Electrical data Technical specificationMost frequent operating modes Preset operating modesVESA-DDC-compatible VGA interface Technical specification Environmental conditionsSUB D port Pin MeaningDVI-D port