Operation
If you wish to change other settings, select the corresponding function from the OSD main menu. All possible adjustments of the main menu are described below.
OSD menu functions
The OSD menu for analog monitor operation is described below. During digital operation some functions are not available, as they are not required due to the digital transmission technology used.
Adjusting the brightness and contrast
Call up the Brightness/Contrast setting window
Brightness | Set the brightness of the display | |||
| With this function you change the brightness of the background lighting. | |||
| You can see whether the ECO operating mode is active under the bar for | |||
| displaying the brightness setting. | |||
Contrast | Set the contrast of the display | |||
| With this function you modify the contrast of bright colour tones. | |||
|
|
|
|
|
Black level | Set the brightness of the display | |||
| With this function you modify the contrast of dark colour tones. | |||
|
| |||
Auto level | Adjust the signal level | |||
| With this function you can automatically set the contrast. | |||
| The function is executed with the |
|
| button. |
| SELECT / MENU | |||
|
|
|
|
|
If the contrast is set too high, bright surfaces can no longer be distinguished from very bright surfaces. If the contrast is set too low, the maximum brightness will not be achieved.
19 |