Fujitsu FTP-628MCL053, FTP-628MCL054 manual Part Numbers, Specifications

FTP-628MCL053/054

■PART NUMBERS

		Part Number
Printer mechanism		FTP-628MCL053 (front paper insertion with head open detection switch and knob)
		FTP-628MCL054 (bottom paper insertion with head open detection switch)
LSI for driving		FTP-628CU301 (ANK only)
Interface	Parallel	FTP-628DCL300 (Centronics)
Board
	Serial	FTP-628DSL305 Serial (RS232C)
Interface	Parallel	FTP-628Y202
cables
	Serial	FTP-628Y302
Power	Head,	FTP-628Y402
cable	motor

■ SPECIFICATIONS

Item	Specifications
Part number	FTP-628MCL053/054
Printing method	Thermal-line dot method
Dot structure	384 dots/line
Dot pitch (Horizontal)	0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical)	0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area	48 mm
Number of columns	ANK 32 columns/line (maximum 12 x 24 dot font)
Paper width	58 mm+0-1
Paper thickness	60 to 100 μ m (some paper in this range may not be used because of
	paper characteristics)
Printing Speed	Maximum 60mm/sec. (480 dot line/sec.) at 8.5V
Character types	Alphanumeric, katakana:	159 types
	International and special characters:	195 types
	JIS Kanji level 1, level 2, non-Kanji
	(supported only by FTP-628DSL228, DCL208): about 6800 types
Character, dimensions (W×H), number of	12 × 24 dots, (1.54 × 3.0 mm), 32 columns: alphanumeric, katakana
columns	24 × 24 dots, (3.0 × 3.0 mm), 16 columns: alphanumeric, katakana, Kanji
	8 × 16 dots, (1.0 × 2.0 mm), 48 columns: alphanumeric, katakana
	16 × 16 dots, (1.0 × 2.0 mm), 24 columns: alphanumeric, katakana, Kanji

2