Chapter 5. Setting Up the Dual Channel SCSI RAID Enablement Card (AIX)
This chapter provides
Note: If you are using the Linux operating system, see Chapter 7, “Installing and Setting Up Software for the Dual Channel SCSI RAID Enablement Card (Linux),” on page 13 for information regarding installing the device driver software and configuring your system. If you have another operating system installed, refer to your operating system documentation.
Verifying the Installation
Verify the initial installation by using the following procedures:
vVerify AIX Software Installation (lslpp)
vVerify Hardware Installation (lsdev)
Verifying AIX Software Installation
To verify that the device driver software for the Dual Channel SCSI RAID Enablement Card is installed, do the following:
1.If necessary, log in as root user.
2.Type:
lslpp
Press Enter.
If the Dual Channel SCSI RAID Enablement Card device driver software is installed, the following is an example of the data that displays on your screen:
FilesetLevel State Type Description (Uninstaller)
devices.pci.14107802.diag | 5.2.0.11 | C | F | |
devices.pci.14107802.rte | 5.2.0.11 | C | F | |
devices.pci.14107802.ucode | 5.2.0.0 | C | F | |
Note: The fileset number 5.2.0.11 displayed in the example might be different from the output displayed on your screen.
If this information displays but you continue to have problems, or if no data displays on your screen, the Dual Channel SCSI RAID Enablement Card device driver did not install. Return to Chapter 3, “Installing the Device Driver Software (AIX),” on page 5. Then continue with “Verifying Hardware Installation.”
If you continue to experience problems, it may be necessary to call your system support organization. Refer to your operating system documentation for instructions.
Verifying Hardware Installation
To verify that your system unit recognizes the Dual Channel SCSI RAID Enablement Card, do the following:
1.If necessary, log in as root user.
2.Type:
lsdev
Press Enter.
9